List Of Xclarity Provisioning Manager Events - Lenovo ThinkSystem ST650 V2 Reference

Table 4. Events organized by severity (continued)
Message String
Event ID
FQXPMER0006M Failed to load XCC factory default settings
FQXPMSD0001M HDD Test was interrupted by the host with a hardware or software
reset
FQXPMSD0002M A fatal error or unknown test error occurred while the device was
executing its self-test
FQXPMSD0003M self-test completed having a test element that failed and the test
element that failed is not known.
FQXPMSD0004M self-test completed having the electrical element of the test failed.
FQXPMSD0005M self-test completed having the servo (and/or seek) test element of the
test failed.
FQXPMSD0006M self-test completed having the read element of the test failed.
FQXPMSD0007M Hard Drive(s) not found
FQXPMSD0008M UEFI is not ready for LXPM to send command to test hard drive.
FQXPMSD0009M Device error is occurred when LXPM send command to test hard
drive.
FQXPMSD0010M uEFI is timeout while LXPM send command to test hard drive.
FQXPMSD0011M The hard drive is not supported by uEFI while LXPM send command
to test hard drive.
FQXPMUP0201M BMC communication failed: EMMC2USB mount failure. Failed to
update the firmware
FQXPMUP0202M Transfer the update package error. Failed to update the firmware
FQXPMUP0203M BMC communication failed: EMMC2USB unmount failure. Failed to
update the firmware
FQXPMUP0204M BMC communication failed: Execute the update cmd failure. Failed to
update the firmware
FQXPMUP0205M BMC communication failed: Get the update status failure.Failed to
update the firmware
FQXPMUP0206M The level of the update package is too old. Failed to update the
firmware.
FQXPMUP0207M The update package is invalid. Failed to update the firmware.
FQXPMUP0208M Failed to execute reboot BMC command

List of XClarity Provisioning Manager events

This section lists all messages that can be sent from the Lenovo XClarity Provisioning Manager.
• FQXPMCL0001K: Bootx64.efi is not found. Failed to Boot OS.
Severity: Warning
User Action:
1. Restart BMC via supported method and reboot the system.
2. If the problem persists, reflash BMC firmware.
178
ThinkSystem ST650 V2 Messages and Codes Reference
Severity
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error