Page 1
IS THE PROPERTY OF STEL PRO DESIGN. IN ANY CASE, THE INFORMATION CAN'T EMPLACEMENT: the CSA BE USED, EXCEPT BY THE WRITTEN X:\01_PRODUIT STANDARD\CW750\DOCUMENTATION\CW750_ISO.dft CONSENT OF ST ELPRO DESIGN. standards For further information or to consult this guide online, please visit our website at www.stelpro.com INSCW7500917...
Page 2
If needed, refer to a specialist (industrial and commercial buildings) who will be able to calculate these heat losses and optimize the required capacity or consult the “Online heating calculation” section of the Stelpro Design Web site (residential buildings).
Page 4
OPERATION & TROUBLESHOOTING ELECTRICAL DIAGRAM Thermal Element protection Disconnect Thermostat switch double pole (optional) (optional) Thermal Element protection Disconnect Thermostat switch single pole (optional) (optional) L2/N Thermal Element Relay protection (optional) L2/N OPERATION Warning: the heater must be properly installed before it is used. DÉPANNAGE TROUBLESHOOTING PROBLEM...
Page 5
REPLACEMENT COMPONENT LIST REPLACEMENT COMPONENT LIST REF. # PART # DESCRIPTION REF. # PART # DESCRIPTION LINEAR THERMAL PROTECTION (AUTO.) (L200) EA0300-06-*** ELEMENT 300W (600MM) PROT-105 EA0400-06-*** ELEMENT 400W (600MM) 1800MM EA0450-09-*** ELEMENT 450W (900MM) LINEAR THERMAL PROTECTION (AUTO.) (L200) PROT-107 EA0600-09-*** ELEMENT 600W (900MM)
Page 6
Moreover, it does not cover the cost of disconnection, transport, and installation. The warranty is limited to the repair or the replacement of the unit or the refund of its purchase price, at the discretion of Stelpro. Any parts replaced or repaired within the warranty period with the written authorization of Stelpro will be warranted for the remainder of the original warranty period.
Need help?
Do you have a question about the CW750-CW1000 and is the answer not in the manual?
Questions and answers