Stelpro CBB Series Installation Instructions Manual

Installation & Instruction
Manual CBB Series
WARNING *** VERY IMPORTANT *** WARNING *** VERY IMPORTANT *** WARNING
Before installing and operating this product, the owner and/or installer must read, understand and follow these instructions and keep them handy for
future reference. If these instructions are not respected, the warranty will be considered null & void and the manufacturer deems no further responsibility
for this product.
This product has been designed to heat, therefore the risk of fire is possible if it is not properly installed & maintained as per the instruction manual.
Not following these instructions could lead to serious injury causing bodily harm, property damage, and electrocutions resulting in death.
This product must be installed by a certified master electrician, in accordance with all local & national building codes.
It is the user's responsibility to assure that materials such as blankets, towels, beds, furniture, laundry baskets, clothing, etc. do not come in contact with
the heater. Not heeding this warning could lead to fire.
Never obstruct the airflow locations, i.e., air intake and exhaust. This could cause the product to overheat and lead to fire.
Certain locations are dustier than others. It is therefore the user's responsibility to determine whether or not the product must be cleaned based on dirt
build-up on the unit's air intake & exhaust, as well as inside the unit. Accumulated dust and dirt could cause components to become defective, which
could lead to fire.
If the installer and/or user modifies this product in any way, he/she will be held responsible for any damages resulting from this modification.
Assure that the heating capacity of the unit be sufficient for the size of room it is intended to heat. If the capacity is insufficient, the heater will work
constantly, causing it to discolour (turn yellow) and/or prematurely deteriorate.
Suggested calculation to determine heating requirements :
10 watts / square foot (0.3 m
1.2 watts / cubic foot (0.3 m
An activated thermal protection (overheat sensor) warns us that the heater has been subjected to an abnormal condition. If this occurs, it is highly
recommended that the unit be inspected by an electrician or reputable repair centre to assure that it is not ruined.
A heater contains components that become hot and produce electrical sparks. Do not operate it in areas where gasoline, paint, or flammable liquids are
used or stored.
This product guarantees the replacement of all parts and labour for a period of one year.
This guarantee is limited only to the factory repair of the unit and does not cover the costs of de-installation, transport, and re-installation.
2
) based on a ceiling height of 8 feet (2.44 meters).
3
) for locations where the ceiling height exceeds 8 feet (2.44 meters).
CBB100903 1