Physical Description
Heater
Heater for the dual-heater,
-40ºC model
IMPORTANT:
1. Disconnect devices: A readily accessible disconnect device in the building installation wiring
should be incorporated.
2. Electrical Connection: Only a qualified electrician is allowed to make electrical connections.
3. If you plan to install this camera enclosure into a tropical, sea coastal, or an environment
where salt water or corrosive industrial waste water/moist are present, please seal each
stainless steel screws and fittings with a silicon grease compounds. This will help prevent
electrolysis to occur and extend the life span of the camera and housing.
Waterproof cable
gland
Power Supply Unit
VIVOTEK
Circulation
fan
User's Manual - 7