Specifications - Olympus VP-20 User Manual

Specifications

General items
4 Recording formats
Linear PCM (pulse-code modulation)
format
MP3 (MPEG-1 Audio Layer 3) format
MP3 (MPEG-2 Audio Layer3) format
MP3 (MPEG-2.5 Audio Layer3) format
4 Sampling frequency
Linear PCM format
22.05 kHz/16 bits
MP3 format
128 kbps
32 kbps mono
8 kbps mono
4 Maximum headphone output
3 mW + 3 mW (at 16Ω load)
4 Recording media*
Internal NAND FLASH memory: 8 GB
* Some memory capacity is used as
a management area, so the actual
usable capacity will always be slightly
less than the displayed capacity.
4 Speaker
Built-in ø 10 mm round dynamic speaker
4 Microphone/Earphone jack
Microphone: 3.5 mm diameter,
impedance 2 Ω
Earphone: 3.5 mm diameter, impedance
8 Ω or more
4 Maximum working output
90 mW (8 Ω speaker)
4 Power source
Standard voltage: 1.5 V
Battery: One AAA dry cell battery (model
LR03), or one Olympus nickel-metal
hydride rechargeable battery
4 External dimensions
17 mm × 130 mm × 17 mm
(Not including largest projection)
4 Weight
37.5 g (including battery)
4 Operating temperature
0 to 42°C (32 to 107.6°F)
Frequency response
4 When recording with built-in
stereo microphone
22.05 kHz
Linear PCM format
44.1 kHz
22.05 kHz
MP3 format
11.025 kHz
4 Recording with built-in stereo
microphone
50 Hz to 17 kHz
(The upper limit of frequency
characteristics depends on each
recording mode.)
4 During playback
20 Hz to 20 kHz
(The upper and lower limit of frequency
characteristics depends on each
recording mode.)
22.05 kHz/16 bits 40 Hz to 10 kHz
128 kbps 40 Hz to 17 kHz
32 kbps mono 40 Hz to 7 kHz
8 kbps mono 40 Hz to 3 kHz
6
EN
79