Olympus VP-20 User Manual page 42

Recording menu [Rec Menu]
Adjusting the voice activation level for
voice-activated recording
1
Slide the REC switch to start
recording.
• Recording pauses automatically
about 1 second after the input
sound becomes quieter than the set
activation sensitivity.
The LED indicator light becomes
4
lit when recording is activated and
flashes when recording is paused.
2
Press the 9 or 0 button to
adjust the voice activation level.
a Voice activation level (moves left/
right to match set level)
b Level meter (changes in proportion
to recording sound volume)
• The setting can be adjusted in 23
steps.
TIP
• Each press of the 0 button increases
the activation sensitivity level of VCVA,
and a high level will result in recording
starting even with small sounds.
• Adjust the VCVA voice activation level
to suit the recording conditions (to
cope with high levels of surrounding
noise or alike).
• To avoid recording mistake, it's
recommended to perform a test
recording beforehand to adjust the
EN
voice activation level.
42
b a