Supplied
Accessories
When you unpack, check that all the
supplied accessories are included.
Camera (1)
CD-ROM (including the Setup
Program and User's Guide) (1)
Wire rope (1)
Shoulder screw M4 (1)
Installation Manual (this document)
(1)
B&P Warranty Booklet (1)
(SNC-Z20N only)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1) MMX and Pentium are registered trademarks of Intel Corporation or its subsidiaries in the United
States and other countries.
About the Supplied
Manuals
Names of Manuals
The following manuals are supplied with
this unit.
Installation Manual (this document)
The Installation Manual describes the names
and functions of the parts of the camera, the
installation and connections of the camera,
etc. Be sure to read it before operating the
camera.
User's Guide (stored in the CD-
ROM)
The User's Guide describes the setup of the
camera and the operations from the Web
browser.
To open the User's Guide, see "Using the
CD-ROM Manuals" below.
Using the CD-ROM Manuals
The supplied CD-ROM disc includes the
User's Guides for the SNC-Z20N/Z20P
(Japanese, English, French, German,
Spanish, Italian and Chinese versions).
CD-ROM System Requirements
The following are required to access the
supplied CD-ROM disc.
• Computer: PC with MMX Pentium
MHz or faster CPU
Installed memory: 64 MB or more
CD-ROM drive: × 8 or faster
• Monitor: Monitor supporting resolution of
800 × 600 or higher
When these requirements are not met, access
to the CD-ROM disc may be slow, or not
possible at all.
Supplied Accessories / About the Supplied Manuals
1)
166
5
GB