Figure 7-14: Pan/Tilt Screen - Cisco Linksys WVC210 User Manual

Wireless-G PTZ Internet Camera with Audio
Pan/Tilt
The Pan/Tilt screen allows you to manage the Camera's preset positions as well as the pan and tile.
Set Positions. Set the desired position through adjusting the control panel.
Calibration. Click this button to reset the calibration of Pan/Tilt area.
Set Home. Set the desired position and then click this button to set Home position.
Current Position. Name the current desired position and then click the Add button to add into the preset list.
Preset Positions. Select the preset position you don't need and then click the Delete button to remove.

Figure 7-14: Pan/Tilt Screen

Pan/Tilt Movement. Enable this if you want to use the Pan/Tilt Movement feature.
Reset. Click this button to reset Default Home Position.
Preset Rotation Sequence. This feature determines how the camera will move when it is set to Rotate. You can
set a number of Preset Positions; the camera will go to the first position, then move through the list of present
positions until it is finished. The camera will stop at the last position in the list.
To create the Preset Sequence, select the desired Preset Position in the left column, select the desired time to
remain at this position, and click the Add >> button. Repeat until the desired sequence is complete.
To delete a position from the Sequence, select the desired position and click the Delete button.
To save your changes, click the Apply button. To cancel any unsaved changes, click the Cancel button. To get
additional information about the screen's features, click the Help button.
Chapter 7: Using the Wireless-G Internet Camera's Web-based Utility 54
Setup