Rowenta ECO INTELLIGENCE DW9210 Manual page 9

Hide thumbs Also See for ECO INTELLIGENCE DW9210:
Table of Contents

Advertisement

PROBLEMS?
Problems
The iron is plugged in, but
the soleplate of the iron
remains cold.
None or too little steam is
being emitted.
Brown streaks come
through the holes inthe
soleplate and stain the linen.
Iron is leaking.
If you have any product problems or queries please contact our Customer Relations Team first
for expert help and advice:
0845 602 1454 - UK (01) 677 4003 - Ireland or consult our wesbite - www.rowenta.co.uk
Cause
No mains supply.
Temperature control set too
low.
Steam control set on dry
position
.
Not enough water in the
water tank.
Anti-Drip is active
(§ 9).
Residues in the steam
chamber or on the soleplate.
Use of chemical descaling
agents.
Fabric fibres have
accumulated in the holes of
the soleplate and are
burning.
Your linen is not rinsed
sufficiently or you have
ironed a new garment
before washing it.
Use of starch.
Pure distilled / demineralised
or softened water is being
used.
Overuse of shot of steam
button.
Soleplate temperature too
low .
6
Solution
Check that the mains plug is
properly inserted or try
plugging the iron into a
different socket.
Set the temperature control
to a higher temperature.
Turn the steam control to
the required setting area.
Fill the water tank.
Wait for the soleplate to
reach the correct
temperature.
Use the Self Clean function
then clean your iron.
Do not add any descaling
agents to the water in the
water tank. Use the Self
Clean function and clean
your iron.
Clean the soleplate with a
non-metallic sponge.
Vacuum the holes of the
soleplate from time to time.
Ensure linen is rinsed
thoroughly to remove any
soap deposits or chemicals
on new garments which
may be sucked by the iron.
Always spray starch onto
the reverse side of the fabric
to be ironed and clean your
iron soleplate.
Only use untreated tap
water or mix half tap water
with half
distilled/demineralised
water. Use the Self Clean
function and clean your iron.
Allow more time between
each shot.
Set the temperature control
to a higher temperature.
Subject to modifications !
EN

Advertisement

Table of Contents
loading

Table of Contents