System Wiring Diagram - Technibel GR9FI30R5I Series Installation Instructions Manual

Installation site selection
AVOID
• Heat sources, exhaust fans.
• Direct sunlight.
• Damp, humid or uneven locations.
• To make holes in areas where electrical wiring or conduits
are located.
DO
• Choose places as cool as possible and well ventilated.
• use lug bolts or equal to bolt down the unit, reducing
vibration and noise.
Provide a solid base for outdoor unit raised from the ground
level. Fix unit to base using 4 anchor bolts.
TO INDOOR UNIT
DELAYED FUSE
220 - 240 V ~ 50 Hz

SYSTEM WIRING DIAGRAM

Main switch for disconnection from the supply line must have a contact separation
in all poles that provides full disconnection under category III overvoltage conditions.
3
EG
10 cm
10 cm