TRENDnet TVP-224HR User Manual page 99

Dial Plan Settings / Dialplan Table Setup
8. Select "Add" and "Telephone
9. Enter following fields
a. Telephone Number: 11
b. Hunt Group ID: 11
c. Min. Digits: 2
d. Max. Digits: 5
e. Strip Length: 2
f. Append Prefix: none
10. Click on "OK"
Dial Plan Settings / Dialplan Table Setup
11. Select "Add" and "HuntGroup"
12. Enter following fields
a. Hunt Group ID: 11
b. Destination ID: 11
13. Click on "OK"
Dial Plan Settings / Dialplan Table Setup
14. Select "Add" and "DestinationID"
15. Enter the following fields
c. Destination ID: 11
d. Hostname (or IP address)
tvp1.dyndns.org
e. Click on "Ok"
Dial Plan Settings / Store Dial Plan
16. Click on "Store"
Changes to network settings require rebooting to take effect.
Changes to the Dial Plan do not and will take effect as soon
as they are stored.
Caution: If you do not store the dial plan, it will be lost
when you reboot.
Note: After changing the default IP address, you will be
required to use the new IP Address (hostname), in this
example tvp2.dyndns.org, to gain access to the TVP-224HR
via web browser user interface or Telnet.
atpm req
atpm aadd 11 2 5 11 2
atpm hadd 11 2 11
atpm dadd 11 dns tvp1.dyndns.org
atpm done
atpm store
99
TVP-224HR User's Guide