TRENDnet TVP-224HR User Manual page 97

11. Enter following fields
a. Hunt Group ID: 22
b. Destination ID 0: 22
12. Click on "OK"
Dial Plan Settings / Dial plan Table
Setup
13. Select "Add" and "DestinationID"
14. Enter the following fields
a. Destination ID: 22
b. Hostname (or IP address)
tvp2.dyndns.org
c. Click on "OK"
Dial Plan Settings / Store Dial Plan
15. Click on "Yes"
Changes to network settings require rebooting to take effect.
Changes to the Dial Plan do not and will take effect as soon as
they are stored.
Caution: If you do not store the dial plan, it will be lost when
you reboot.
Note: After changing the Internet Access settings, you will be
required to use 192.168.0.1 to gain access from the local LAN
segment or tvp1.dyndns.org, to gain remote access via the
Internet.
TVP-221HTVP-224HR configuration (cable connection) on site B
Web Configuration
Local (from a PC in same Segment )
Open your browser
1. Enter 192.168.0.1
2. You will be prompted for
Username and Password.
Default Username and
Password are "admin" and "123"
respectively.
Login
From the Logon to the Web
Configuration by opening your browser
24. Enter 192.168.0.1
25. You will be prompted for
Username and Password.
atpm dadd 22 dns tvp2.dyndns.org
atpm done
atpm store
Telnet / Console
Console
Connect RS-232 to TVP-224HR
and PC
Open Hyper Terminal
Input parameters:
Baud rate
Number of data bit
Parity check
Number of stop bit
Flow control
Enter "123"
97
TVP-224HR User's Guide
19,200
8
None
1
None