TRENDnet TVP-224HR User Manual
  1. Manuals
  2. Brands
  3. TRENDnet Manuals
  4. Network Router
  5. TVP-224HR
  6. User manual

TRENDnet TVP-224HR User Manual

Voip gateway router 4 port
Hide thumbs Also See for TVP-224HR:
Table of Contents

Advertisement

Quick Links

Download this manual
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TVP-224HR and is the answer not in the manual?

Questions and answers

Related Manuals for TRENDnet TVP-224HR

Summary of Contents for TRENDnet TVP-224HR

  • Page 2: Ce Declaration Of Conformity

    FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 3: How To Use This Manual

    Important Safety Instructions Before you plug the TVP-224HR into an electrical outlet, carefully read all the installation instructions in Chapter 2. For your own safety and the safety of your equipment, always take the following precautions: Follow instructions and warnings in the documentation.

  • Page 4: Documentation Abbreviations

    Throughout this guide, the user will come across a number of abbreviations that are common throughout the industry. following abbreviations: ATPM DTMF H.323 ICMP IMTC TVP-221H TVP-224HR PSTN TCID TFTP The user should be familiar with the Address Translation and Parsing Manager Command Line Interface Digital Signal Processor Dual Tone Multi-Frequency...

  • Page 5: Notation Conventions

    Arguments for which you supply values are in italics. courier Messages that the TVP-224HR CLI displays are in plain courier font. Elements in square brackets are optional. { x | y | z } Alternative but required elements are grouped in braces ({ }) and separated by vertical bars ( | ).

  • Page 6: Table Of Contents

    INSTALLING THE TVP-224HR... 17 Network Requirements ... 17 Installing the TVP-224HR ... 17 Connecting to the telephony devices... 17 Connecting to the LAN Network ... 17 Assigning an IP address to the TVP-224HR ... 18 Hardware Installation Procedures... 18 Table of Contents...
  • Page 7 CHAPTER 3 ... 20 ROUTER SETUP ... 20 Overview ... 20 Configuration Program ... 21 Preparation ... 21 Home Screen ... 22 LAN Configuration ... 24 DHCP ... 25 CHAPTER 4 PC CONFIGURATION ... 26 Overview ... 26 Windows Clients... 26 TCP/IP Settings - Overview...
  • Page 8 Upgrade Firmware... 54 Access Control ... 55 Access Control Screen ... 56 Common Port Assignment ... 57 CHAPTER 8 ... 61 TVP-224HR TELEPHONY CONCEPTS ... 61 How the TVP-224HR Operates... 61 ATPM ... 61 Destination ... 61 Hunt Group... 62 Dial Plan ...
  • Page 9 MAKING CALLS WITH TVP-224HR ... 81 10.1 Configuration Examples ... 81 Default Dial Plan... 81 10.2 Making a call with TVP-224HR FXS Port... 82 10.3 Making a call with TVP-224HR FXO Port... 83 10.4 Web Browser Sample Dial Plan ... 83...
  • Page 10 Case 4: Gateway Prefix–Simplified Gateway Phone to Gateway Phone ... 93 10.8 Dial in PLAR (Hotline) – TVP-224HR / TVP-224HR... 100 Case 5: PLAR (Hotline) FXO to FXS example ... 100 Case 6: PLAR (Hotline) FXS to FXO example ... 103 Case 7: PLAR (Hotline) FXO to FXO example...
  • Page 11 Appendix F - Worksheets ... 122 IP Parameters ... 122 ATPM Destination Table ... 122 Remote Destinations ... 123 ATPM Hunt Group Table ... 124 ATPM Address Table ... 125 Index... 126 Setup...

  • Page 12: Chapter 1

    This chapter gives an overview of the 4 ports desktop version VoIP Gateway Router (TVP- 224HR) and a detailed description of its front panel and rear panel. Congratulations on the purchase of your new TVP-224HR. The TVP-224HR is a multi- function device providing the following services:...

  • Page 13: Internet Access Features

    LAN Features • DHCP Server Support. IP address to PCs and other devices upon request. The TVP-224HR can act as a DHCP Server for devices on your local LAN and WLAN. Configuration & Management •...

  • Page 14: Networking Protocols

    • User’s guide (CD) • RJ45 Cable Front Panel The front panel of the TVP-224HR contains a push button and LED indicators. The following figure illustrates the front panel of the TVP-224HR. Description across the network. To enable IP protocol, the TVP-224HR must have a Real IP address, subnet, and gateway assigned to it.

  • Page 15: Led Indicators

    LED Indicators The LED indicators on the front panel display the current status of the TVP-224HR as described in the following table: Indicator Color Green SYSTEM Green Green Link Green Link Green Green LINE Green Channels Reset Button There is a recessed push button located next to the SYSTEM LED. This button allows you to reset the TVP-224HR or force the TVP-224HR to enter firmware upgrade mode.

  • Page 16: Wan / Lan / Console Ports

    WAN / LAN / Console Ports The TVP-224HR is equipped with 1 WAN and 4 LAN Ethernet interfaces with 10/100 Mbps auto-negotiation, auto MDIX capability. The Ethernet ports are located on the rear panel. Console There is a 9-pin RS-232 interface port on the front panel. Their functions are...

  • Page 17: Chapter 2

    UTP cable for 10 Mbps connections, but use Category 5 for 100 Mbps connections. Insert one end of the Ethernet cable into one of the 4 RJ45 ports on the rear panel of the TVP-224HR and other end of the cable to a network device / Setup...

  • Page 18: Assigning An Ip Address To The Tvp-224Hr

    The IP address is the unique logical address identifying each IP node, such as the TVP-224HR, on an IP network. An IP address is a 32-bit number expressed as four decimal numbers from 0 to 255 separated by periods. The TVP-224HR can be configured with a fixed IP address, subnet mask and default gateway.

  • Page 19: Check The Leds

    5. Check the LEDs • The Power LED should be ON. • The Systems LED should be blinking. • For each LAN (PC) connection, the LAN Link/Act LED should be ON (provided the PC is also ON.) • The WAN LED should be ON. •...

  • Page 20: Chapter 3

    PCs on your local LAN may also require configuration. For details, see Chapter 4 - PC Configuration. Other configuration may also be required, depending on which features and functions of the TVP-224HR you wish to use. Use the table below to locate detailed instructions for the required functions. To Do this: Configure PCs on your LAN.

  • Page 21: Configuration Program

    IP Address during configuration. Using your Web Browser To establish a connection from your PC to the TVP-224HR: 1. After installing the TVP-224HR in your LAN, start your PC. If your PC is already running, restart it. 2. Start your WEB browser.

  • Page 22: Home Screen

    Home Screen After Logging on to the TVP-224HR, you will see the Home screen which is the System Status page. When you connect in future, you will see this screen when you connect. An example screen is shown below.
  • Page 23 Navigation & Data Input • Use the menu bar on the top of the screen, and the "Back" button on your Browser, for navigation. • Changing to another screen without clicking "Save" does NOT save any changes you may have made. You must "Save" before changing screens or your data will be ignored.

  • Page 24: Lan Configuration

    Data - LAN Screen TCP/IP IP address for the TVP-224HR, as seen from the local LAN. Use the IP Address default value unless the address is already in use or your LAN is using a different IP address range. In the latter case, enter an unused IP Address from within the range used by your LAN.

  • Page 25: Dhcp

    You can only use one (1) DHCP Server per LAN segment. If you wish to use another DHCP Server, rather than the TVP-224HR 's, the following procedure is required. 1. Disable the DHCP Server feature in the TVP-224HR. Disable the DHCP by entering “0” in the number of clients field.

  • Page 26: Chapter 4 Pc Configuration

    224HR. The first step is to check the PC's TCP/IP settings. The TVP-224HR uses the TCP/IP network protocol for all functions, so it is essential that the TCP/IP protocol be installed and configured on each PC. TCP/IP Settings - Overview If using the default TVP-224HR settings, and the default Windows TCP/IP settings, no changes need to be made.

  • Page 27: Checking Tcp/Ip Settings - Windows 9X/Me

    Using DHCP To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows setting. Using this is recommended. By default, the TVP-224HR will act as a DHCP Server. Restart your PC to ensure it obtains an IP Address from the TVP-224HR.
  • Page 28 • On the Gateway tab, enter the TVP-224HR 's IP address in the New Gateway field and click Add, as shown below. Your LAN administrator can advise you of the IP Address they assigned to the TVP-224HR. • On the DNS Configuration tab, ensure Enable DNS is selected. If the DNS Server Search Order list is empty, enter the DNS address provided by your ISP in the fields beside the Add button, then click Add.

  • Page 29: Checking Tcp/Ip Settings - Windows Nt4.0

    PC Configuration Checking TCP/IP Settings - Windows NT4.0 1. Select Control Panel - Network, and, on the Protocols tab, select the TCP/IP protocol, as shown below. Figure 9: Windows NT4.0 - TCP/IP 2. Click the Properties button to see a screen like the one below. Figure 10: Windows NT4.0 - IP Address...
  • Page 30 If your PC is already configured, check with your network administrator before making the following changes. 1. The Default Gateway must be set to the IP address of the TVP-224HR. To set this: • Click the Advanced button on the screen above.
  • Page 31 PC Configuration Figure 12: Windows NT4.0 – DNS...

  • Page 32: Checking Tcp/Ip Settings - Windows 2000

    Checking TCP/IP Settings - Windows 2000: 1. Select Control Panel - Network and Dial-up Connection. 2. Right - click the Local Area Connection icon and select Properties. You should see a screen like the following: Figure 13: Network Configuration (Win 2000) 3.

  • Page 33: Using Dhcp

    If your PC is already configured, check with your network administrator before making the following changes. • Enter the TVP-224HR 's IP address in the Default gateway field and click OK. (Your LAN administrator can advise you of the IP Address they assigned to the TVP-224HR.) •...

  • Page 34: Checking Tcp/Ip Settings - Windows Xp

    Checking TCP/IP Settings - Windows XP 1. Select Control Panel - Network Connection. 2. Right click the Local Area Connection and choose Properties. You should see a screen like the following: Figure 15: Network Configuration (Windows XP) 3. Select the TCP/IP protocol for your network card. 4.
  • Page 35 If your PC is already configured, check with your network administrator before making the following changes. • In the Default gateway field, enter the TVP-224HR 's IP address and click OK. Your LAN administrator can advise you of the IP Address they assigned to the TVP-224HR. •...

  • Page 36: Internet Access

    9. Click Finish to close the New Connection Wizard. Setup is now completed. Accessing AOL To access AOL (America On Line) through the TVP-224HR, the AOL for Windows software must be configured to use TCP/IP network access, rather than a dial-up connection. The configuration process is as follows: •...

  • Page 37: Macintosh Clients

    • Ensure your DNS settings are correct. Linux Clients To access the Internet via the TVP-224HR, it is only necessary to set the TVP-224HR as the "Gateway". Ensure you are logged in as "root" before attempting any changes. Fixed IP Address By default, most Unix installations use a fixed IP Address.

  • Page 38: Chapter 5 Operation And Status

    This Chapter details the operation of the TVP-224HR, the system status screen as well as the channel status screen Operation Once both the TVP-224HR and the PCs are configured, operation is automatic. However, there are some situations where additional Internet configuration may be required: •...
  • Page 39 IP addresses allocated to them, use the PC Database option on the Other menu. This shows the possible number of Clients as chosen The starting IP address to be assigned by the DHCP Server This displays the firmware version of the TVP-224HR. The current boot version. Operation and Status...

  • Page 41: Chapter 6 Internet Features

    Chapter 6 Internet Features This Chapter explains when and how to use the TVP-224HR's "Internet" Features. Overview The following advanced features are provided. • Internet Access Configuration • • Packet filter • Dynamic DNS • Special Applications • Virtual Servers •...
  • Page 42 Figure 19: Connection Details - Fixed/Dynamic IP Address Data - Fixed/Dynamic IP address Screen Internet The IP Address of this device, as seen by Internet users. This address IP Address is allocated by your ISP (Internet Service Provider). The Network Mask associated with the IP Address above. Subnet Mask The IP Address of the remote Gateway or Router associated with the Default Gateway...

  • Page 43: Pppoe Configuration

    PPPoE Configuration If using PPPoE (PPP over Ethernet), a screen like the following example will be displayed when the "PPPoE" button is clicked. Figure 20: PPPoE Configuration Screen Data - PPPoE Screen Connection Enable PPPoE User Name Password Idle timeout in seconds IPCP fixed IP address Authentication...

  • Page 44: Special Applications

    If you use Internet applications which use non-standard connections or port numbers, you may find that they do not function correctly because they are blocked by the TVP-224HR 's firewall. In this case, you can define the application as a "Special Application".

  • Page 45: Dmz

    Type - Select the protocol (TCP or UDP) used when you send data to the Outgoing remote system or service. Ports From - Enter the beginning of the range of port numbers used by the application server, for data you send to it. If the application uses a single port number, enter it in both the "From"...

  • Page 46: Dynamic Dns Screen

    3. Enter your DDNS data on the TVP-224HR's DDNS screen (shown below). 4. The TVP-224HR will then automatically ensure that your current IP Address is recorded and updated at the DDNS server. If the DDNS Service provides software to perform this "IP address update"; you should disable the "Update"...

  • Page 47: Virtual Servers / Port Forwarding

    johnsmith This message is returned by the DDNS Server DDNS Status Normally, this message should be something like "Update If the message indicates some problem, you need to connect to the Virtual Servers / Port Forwarding This feature allows you to make Servers on your LAN accessible to Internet users. Normally, Internet users would not be able to access a server on your LAN because: •...

  • Page 48: Virtual Servers Screen

    This address should be static, rather than dynamic, to make it easier for Internet users to connect to your Servers. However, you can use the DDNS (Dynamic DNS) feature to allow users to connect to your Virtual Servers using a URL, instead of an IP Address. Virtual Servers Screen The Virtual Servers screen is reached by the Virtual Servers link under the Router Configuration menu.

  • Page 49: Voice Qos

    It is more convenient if you are using a Fixed IP Address from your ISP, rather than Dynamic. However, you can use the Dynamic DNS feature, described in the following section, to allow users to connect to your Virtual Servers using a URL, rather than an IP Address. Voice QoS QoS is a popular feature that “guarantees”...
  • Page 50 (kbits/sec) The values for speed are usually given in kilo Bits per second [kb/s] as are the values to be entered into TVP-224HR. If you are given you Maximum Uplink Bandwidth in KB/s, To convert to kilo Bytes simply multiply the kilo Bytes by a value of 8...

  • Page 51: Chapter 7 Administration

    The firmware (software) in the TVP-221HR can be upgraded using Upgrade your Web Browser. Firmware Access Control Administration Password Setup / Login The Administration Password Page allows you to change your password on the TVP-224HR Figure 25: Administration Password Setup Screen...

  • Page 52: Remote Administration

    Enter the default "User Name" and the "Password" you set on the Administration Password Setup screen above. Remote Administration Remote Administration allows you to connect to this interface via the Internet, using your Web browser or Telnet. By default, both services are activated. Figure 26: Password Dialog TVP-224HR User’s Guide...
  • Page 53 "HTTP//"), the Internet IP address of this device (NOT the LAN IP address), and the port number, as follows: HTTPS://ip_address:port_number Where: ip address is the Internet IP address of this device. port number is the port number assigned on this screen. (You must assign a password!) TVP-224HR User’s Guide...

  • Page 54: Upgrade Firmware

    This allows you to restrict remote access by IP address. To enable, |Trusted Telnet enter the IP address of the trusted client. Clients If enabled, this service allows the TVP-224HR to reply when Ping Reply pinged. To connect from a remote PC via the Internet 1.

  • Page 55: Access Control

    Update accessing the Internet via the TVP-224HR will lose their connection. When the upgrade is finished, the TVP-224HR will restart, and this management connection will be unavailable during the restart. Cancel does NOT stop the Upgrade process if it has started. It only Cancel clears the input for the "Upgrade File"...

  • Page 56: Access Control Screen

    After creating a group, you can start populating the group with packet filter restrictions. Below, please see the Packet Filter Screen. Figure 29: Access Control Screen deleted. This group contains PCs not allocated to any other group. the IP or MAC address you wish to delete they are currently in TVP-224HR User’s Guide...

  • Page 57: Common Port Assignment

    Messenger (AIM) AOL ICQ ICQ Firewall Settings BAYVPN CarbonCopy32 CITRIX Cu-SeeMe Direct Connect FW1VPN Notes Notes Cornell 1.1 TVP-224HR User’s Guide Port Numbers NoneN 1723 Port Numbers 5190 - 5193 5190 5190, dynamic > 1024 1023 - 1680 1494 7648...
  • Page 58 Baldur's Gate Black and White Civilization 3 Consult this page (You'll have to click through an ad.) Civilization Conquests users should also consult the manual, starting p. 47. TVP-224HR User’s Guide None for chat None 1547 1352 6901& 6891-6900 1720 1503...
  • Page 59 Each computer must use a different port number. Add 1 for each player starting with 2213. MSN Game Zone MSN Game Zone (DX) Myth Need for Speed Need for Speed 3 Outlaws TVP-224HR User’s Guide 13139 27900 28900 29900 29901 26214 3100 3568 3999...
  • Page 60 Cannot Log On XBox with Router PCs not assigned to any group will be in the "Default" group. PCs deleted from any other Group will be added to the "Default" group. TVP-224HR User’s Guide 27660 (+1 for each player) 2346 2346 6112...

  • Page 61: Chapter 8

    Gateways. The ATPM collects telephone number dialed by users, decides whether the dial string is part of the dial plan and, if it is, maps it to a remote TVP-224HR / TVP-224HR. When the call is set up to the destination, a sub-string of the original dial string will be sent along to the remote VoIP Gateway.

  • Page 62: Hunt Group

    In effect, the Hunt Group will just have this one member. Dial Plan The dial plan is a database inside the TVP-224HR that allows the ATPM to map telephone numbers dialed to IP addresses of remote VoIP Gateways. The dial plan consists of three tables;...

  • Page 63: Hunt Group Table

    Dest ID DTMF Relay Voice from PSTN is compressed by the TVP-224HR before it is sent across the IP network and then decompressed by the destination VoIP gateway. The voice codecs supported by the TVP-224HR are designed for ideally compressing and decompressing human voice.

  • Page 64: Voice Codecs

    PSTN. This method in which the TVP-224HR handles DTMF tone is so called DTMF relay. The TVP-224HR handles DTMF relay per H.323 specifications. Certain third party VoIP devices may handle DTMF relay per IMTC standard. For the TVP- 224HR to interoperate with those VoIP devices, users need to specify which remote VoIP devices uses IMTC conforming DTMF relay technique.

  • Page 65: Chapter 9

    Chapter 9 Configuring VoIP from a Web Browser This chapter explains procedures for configuring the TVP-224HR from a web browser. HTTP setting mode This section describes the processes for setting up the VoIP Gateway once it has been installed. Java enabled browsers including Microsoft Explorer version 4 or higher, or Navigator version 4.5 or higher can be used in this section to view and change...

  • Page 66: Main Menu Function Briefings

    Dial Plan Settings Line Settings Administration Status Help Manual TVP-224HR User’s Guide View System Status Set H.323 Parameters Links to dial plan setting / entry / store / clear / restore pages. You should complete the dial Plan work sheets before working in this menu.

  • Page 67: System Status

    System Status Select Home In order to view the System Status page, please navigate to Home. The System Status page will display the following parameters: Firmware Version • TVP-224HR VoIP Gateway Version: • Boot Loader Version: • RTOS Version: •...

  • Page 68: H.323 Parameters

    RTCP ports. According to the H.323 specification, RTP port number should be even in value, and the RTCP port number should be one greater than the RTP port. Typically, numbers from 0 to 1023 are reserved on most systems. TVP-224HR User’s Guide...

  • Page 69: Gatekeeper

    The primary function of the gatekeeper component is to provide address translation services. This function converts external (telephone number) addresses and alias (name) addresses to network addresses, allowing users to maintain the same telephone numbers or alias addresses regardless of changes to their network addresses. TVP-224HR User’s Guide...
  • Page 70 6. Time To Live: 7. Endpoint Prefix: This command is used to set the H.323 prefix that the TVP-224HR uses when registering to an H.323 gatekeeper. 8. Terminal ID: To specify GW’s ID. operation (the gatekeeper address must be properly assigned).

  • Page 71: Aliases

    TVP-224HR User’s Guide 9. GateKeeper ID: To specify Gate Keeper’s ID. You'll have to reboot the system to make your changes take effect! Aliases For the most part end users will not be using these functions / features and / or should use the default settings.
  • Page 72 TVP-224HR User’s Guide...

  • Page 73: Dial Plan Settings

    1. From Navigation Bar, Select Dial Plan Settings / Dial Plan Table Setup. 2. The default values are Add and Telephone. Click on Select. The following window will appear. (IP takes precedence over Hostname) (IP takes precedence over Hostname) TVP-224HR User’s Guide...

  • Page 74: Hunt Group Table

    The number of digits to be stripped at the beginning of the collected dial string before forwarding the string to the destination. (Optional) Digit(s) to be added to the beginning of the collected dialed string before forwarding it to the destination. TVP-224HR User’s Guide...

  • Page 75: Destination Id Table

    The Destination ID is either a Remote Destination IP (or Hostname but not both) or a Local Destination Channel. Please note that if a Remote Destination IP and a Hostname is specified, the Remote Destination IP takes precedence. TVP-224HR User’s Guide...

  • Page 76: Dial In Plar / Cid

    Each telephony port of the TVP-224HR must be assigned a unique destination ID. Fill out the worksheet for local destinations by designating each port a unique destination ID, Dial in PLAR / CID Data – Dial in PLAR / CID Screen...

  • Page 77: Dial In Plar Considerations And Limitations

    If the Gateway is turned off for what ever reason, the Dial Plan from Non- Volatile Storage is copied into the Flash / Working memory and processes phone calls accordingly Clear Dial Plan Clear Dial Plan - Will clear the Dial Plan from DRAM / Working memory. TVP-224HR User’s Guide...

  • Page 78: Restore Dial Plan

    Table or Destination ID table, you have to Click on Complete. This only saves the plan to the working memory / DRAM. If there was a power outage or the TVP-224HR was unplugged or a system crash for what ever reason, the Dial Plan in working memory / DRAM will be lost.

  • Page 79: Total Time

    (Default - none) Channel Parameters Allows you to set parameters associated with each port, such as transmission / receive gains and comfort noise level 9.10 Administration Password (See Chapter 7) 1. Enter Old Password 2. Enter New Password TVP-224HR User’s Guide...

  • Page 80: Telnet Access

    Here you will find helpful definitions to common parameters in the TVP- 224HR User Interface. In addition, from the main page in the help menu, you can link to the Trendware FTP website and download the most current User Guide and support materials TVP-224HR User’s Guide ftp.trendware.com/TVP-224HR/...

  • Page 81: Chapter 10

    This chapters shows how to make phone calls from telephony devices connected to the TVP-224HR directly through or indirectly. 10.1 Configuration Examples Default Dial Plan Before any configuration set up, your TVP-224HR should have the following basic default information. Network Mask:...

  • Page 82: 10.2 Making A Call With Tvp-224Hr Fxs Port

    Hint 10.2 Making a call with TVP-224HR FXS Port TVP-224HR has two FXS ports. An FXS port can connect to an analogue phone directly, and a FXO port can connect to a PBX system or CO line. Pick up your extension handset, for example, 316 and dial ‘201’.

  • Page 83: 10.3 Making A Call With Tvp-224Hr Fxo Port

    TVP-224HR will play two quick address ack tones, Du Du, to destination. If the desired destination phone number is illegal, the TVP-224HR will play three out of service tones, please check the dial plan and your desired destination phone number.
  • Page 84 Note: The Diagram below of Gateway A & B could be any combination of either the TVP-224HR (connected to switch by WAN port) or the TVP-221H (Connected by LAN port). The switch that joins these two gateways serves the purpose of initial lab configuration.
  • Page 85 Destination Table (Both Local and Remote). The dial plan has to be entered into all Gateways so that the local gateway knows how to process calls, sending them to its local ports or to remote gateways for further processing. TVP-224HR User’s Guide...
  • Page 86 5. From the Navigation Menu on the left side, Select Dial Plan Table Setup 6. From the window, please Select <Add> <Local_Destination_Channel> 7. The following window will appear. Please Enter Data as shown 8. Click on Ok TVP-224HR User’s Guide...
  • Page 87 Gateway A and Gateway B Dial Plan Tables Gateway A - Telephone Number Table Phone Hunt Min. Group ID Digits Max. Prefix Prefix Digits strip Address None None TVP-224HR User’s Guide Comment Function Dialing “203” calls phone on FXS Port Dialing “204” calls phone on FXS Port...
  • Page 88 Hunt Group ID Hunt Type None None None “9” None None # of Dest ID(s) TVP-224HR User’s Guide Dialing “800” calls This is an example PBX on FXO Port only. Please 0, which then dials substitute your “800”. ext# on PBX if applicable Dialing “801”...
  • Page 89 Prefix Digits strip Address None None None None None None TVP-224HR User’s Guide Function Comment Dialing “203” calls phone on Port 2 Dialing “204” calls phone on Port 2 Dialing “9” from local Assumes that phone on FXS Port Telephone line is...

  • Page 90: 10.5 Making A Call Between Gateway A And Gateway B

    Pick up phone 203 (204) # of Dest ID(s) Destination Port = 2 Port = 3 Port = 0 Dest = 192.168.1.20/1720 TCP Equipment Operation 1. GW dial tone is heard. TVP-224HR User’s Guide Dest. ID(s) Receiver Operation at GW A...

  • Page 91: Case 2: Gateway Phone To Pstn Phone

    1. GW A Line 1 LED “ON” 2. GW A is connected to PSTN 1. PSTN call processing Phone 7777-1234 is ringing TVP-224HR User’s Guide Pick up phone 203 VoIP Conversation Receiver Operation at GW A Receiver on 7777-1234 picks...

  • Page 92: Case 3: Pstn Phone To Gateway Phone

    1. Du Du tone is heard 2. VoIP call processing 1. GW A Line 1 LED “ON” 1. GW B Line 3 LED “ON” TVP-224HR User’s Guide Receiver Operation at GW B phone 203 Phone 203 is ringing Receiver Picks up phone...

  • Page 93: 10.7 Pppoe, Dhcp, And Ddns Clients

    TVP-224HR, insert one end of an Ethernet cable into one of the 4 RJ45 LAN ports on the rear panel of the TVP-224HR and the other end directly to your PC Terminal. By default, the TVP-224HR’s DHCP server is enabled. Make sure your computer is DHCP client enabled (See Chapter 4, PC Configuration).
  • Page 94 • tvp2.dyndns.org Clients used on this topology : • TVP-224HR on site A has PPPoE, and • TVP-224HR on site B has DHCP, and Network topology illustrated as follows is applied for TVP-224HR on site A is applied for TVP-224HR on site B...
  • Page 95 4. Select “On” 5. Enter Server Name, Host Name, User Name, Password 6. Click on “Save” TVP-224HR User’s Guide Telnet / Console Console Connect RS-232 to TVP-224HR and PC Open Hyper Terminal Input parameters: Baud rate Number of data bit Parity check...
  • Page 96 Once Internet Access is setup, you could choose to reboot the TVP-224HR, and then use a PC in the same segment and with a web browser, access theTVP- 224HR: If using the Router’s DHCP Server, make sure the routers DHCP Server is on and that the configuring PC is DHCP Client enabled.
  • Page 97 Username and Password. TVP-224HR User’s Guide atpm dadd 22 dns tvp2.dyndns.org atpm done atpm store Telnet / Console Console Connect RS-232 to TVP-224HR and PC Open Hyper Terminal Input parameters: Baud rate Number of data bit Parity check Number of stop bit Flow control Enter “123”...
  • Page 98 TVP-224HR’s DHCP Server. If you are trying to access the TVP- 224HR from a PC in the same segment as the TVP-224HR (LAN), Open your browser and enter a. Enter 192.168.0.1 If you would like to access the TVP-...
  • Page 99 Note: After changing the default IP address, you will be required to use the new IP Address (hostname), in this example tvp2.dyndns.org, to gain access to the TVP-224HR via web browser user interface or Telnet. TVP-224HR User’s Guide...

  • Page 100: 10.8 Dial In Plar (Hotline) - Tvp-224Hr / Tvp-224Hr

    10.8 Dial in PLAR (Hotline) – TVP-224HR / TVP-224HR Trendware VoIP Gateways are capable of automatically calling or forwarding an incoming call from the Internet or PSTN line onward to another remote destination. The following three examples illustrate these topographies: 1.
  • Page 101 PSTN Caller near Site A picks up phone 8888-1234 and dials PSTN number Usage: 9999-2222 which is connected to Site A TVP Gateway FXO port 201. TVP Gateway A will automatically forward the call via internet to TVP Gateway B FXS phone 203. TVP-224HR User’s Guide...
  • Page 102 11. Enter 22203 into the PLAR Address Field 12. Click on OK Dial Plan Settings / Store Dial Plan 13. Click on Yes TVP-224HR User’s Guide Telnet / Console From Console Enter Username “admin” Enter Password “123” Windows command prompt Enter “telnet xxx.xxx.xxx.xxx”...

  • Page 103: Case 6: Plar (Hotline) Fxs To Fxo Example

    TVP Gateway A FXO 201 which is connected to PSTN line 9999-2222. Caller will hear PSTN dial tone on Site A and can then call any number on local PSTN. TVP-224HR User’s Guide Caller on Site B could dial any Site A local...
  • Page 104 Dial Plan Settings / Dial in PLAR/CID 12. Enter 11201 in the PLAR Address Field 13. Click on OK Dial Plan Settings / Store Dial Plan 14. Click on Yes TVP-224HR User’s Guide Telnet / Console From Console Enter Username “admin” Enter Password “123”...

  • Page 105: Case 7: Plar (Hotline) Fxo To Fxo Example

    Gateway A automatically establishes a connection with TVP Gateway B Port 0, FXO 201 to get the dial tone from PBX on site B. After getting dial tone, the caller can call any Site B PBX extension. TVP-224HR User’s Guide FXO (201) Caller on Site A PBX...
  • Page 106 Dial Plan Settings / Dial in PLAR/CID 11. Enter 22201 in the PLAR Address Field 12. Click on OK Dial Plan Settings / Store Dial Plan 13. Click on Yes TVP-224HR User’s Guide Telnet / Console From Console Enter Username “admin” Enter Password “123”...

  • Page 107: Chapter 11

    FXO recognizes signals and draws current to indicate an active state. It is a trunk loop start operation that emulates a single-line telephone to: 1. Central Office lines 2. PBX station There are three basic environments that the TVP-224HR can be applied to. They are described in the following sections. TVP-224HR User’s Guide...

  • Page 108: Application 1: Special Fxs Connections

    Gateway, through a FXO port and passed on to the PBX system. The PBX system will then forward the call to the dedicated terminal / extension. Site A TVP-221H Normal FXS Connection TVP-224HR User’s Guide TVP-224HR FXS Connection w/ CO Trunk Interface Card TVP-224HR...

  • Page 109: Chapter 12

    1. The TVP-224HR is properly installed, LAN connections are OK, and it is powered ON. 2. Ensure that your PC and the TVP-224HR are on the same network segment. 3. If your PC is set to "Obtain an IP Address automatically" (DHCP client), restart it.

  • Page 110: Other Problems

    The TVP-224HR processes the data passing through it, so it is not Solution 2: transparent. 1. Use the Special Applications feature to allow the use of Internet applications which do not function correctly. 2. If this does solve the problem you can use the DMZ function. This should work with almost every application, but: 3.

  • Page 111: Appendix A - Technical Specifications

    Appendix A - Technical Specifications TVP-224HR Technical Specifications Telephony Interface Desktop with 4 Analog Ports Physical interface • Loop start 2 x FXO (RJ-11) • Loop start 2 x FXS (RJ-11) Programmable line Complex line impedance interfaces H.323v3 (Normal/fast-start mode)
  • Page 112 300 Hz ~ 3400 Hz +/- 2 dB w.r.t. 1004 Hz ≥ 18 dB -6 dB to +6 dB 0 dB to 13 dB ≥ 45 dB 25 mA nominal 40 Vrms nominal 16.67 Hz, 20 Hz (default), 25 Hz or 50 Hz Loop current TVP-224HR User’s Guide...

  • Page 113: Console Port

    Console Port The console port uses a DB-9 RS-232 connector. The supplied straight through RS-232 cable connects the console port of the TVP-224HR to a console PC or terminal. Pin assignment for the port is described in the following table.

  • Page 114: Fxo Port Pin Assignments

    The FXS Telephony Interface Module has 2 RJ11C/W modular jacks. The following diagram and table show the assignments of the pin for the RJ11 port. RJ-11 pin Signal Not connected Ring Not connected Signal Not connected Ring Not connected TVP-224HR User’s Guide...

  • Page 115: Appendix B - Connecting Through Console

    Appendix B - Connecting through Console The console port uses a DB-9 RS-232 connector. The supplied straight through RS- 232 cable connects the console port of the TVP-224HR to a console PC or terminal. Task Connect RS-323 Cable to TVP-224HR RS-232...

  • Page 116: Appendix C - Connecting Through Telnet

    (See User Guide for More Information). Alternatively, you can use Telnet to locally access the TVP-224HR, if you are under a router or switch and the TVP-224HR and your computer are in the same network segment.
  • Page 117 IP Address. If you confirm that you do not have Internet Access, please refer to the trouble shooting section of the User Manual or consult your ISP to make sure your Internet Access Data is correct and accurately entered into the TVP-224HR. TVP-224HR User’s Guide Console> ping...

  • Page 118: Appendix D - Cli Commands

    Move the configuration from temporary area to active area. Erase the configuration from NVS Store the active configuration data into NVS Clear screen Switch to download mode Display help screen Reset the system Set default gateway’s IP address TVP-224HR User’s Guide...

  • Page 119: Download Mode Commands

    Show ringer’s frequency Set line impendence for GW line interface Set ringer’s frequency Description Display help screen Switch to normal operation mode Set default gateway ‘s IP address Set IP address Set IP subnet mask Start downloading file TVP-224HR User’s Guide...

  • Page 120: Appendix E - Factory Default Settings

    Appendix E - Factory Default Settings The following table lists the settings of certain parameters before the TVP-224HR is shipped. Parameter Network PPPoe DYN DNS DHCP Server Configured IP address Configured IP subnet mask Default gateway IP address Current active IP address...
  • Page 121 Voice codec Preferred voice codec Telephony PCM codec receiver gain for FXO ports TVP-224HR User’s Guide 1720 None H323 V2 Signal 30000 None G.723 6.3kbps -1 dB...

  • Page 122: Appendix F - Worksheets

    Appendix F - Worksheets IP Parameters Consult your network manager to obtain a static IP address for the TVP-224HR, and the information about the IP subnet mask and the default gateway for your network. Fill out the following work sheet before configuring the TVP-224HR.

  • Page 123: Remote Destinations

    Remote Destinations Each remote TVP-224HR to be reached must be assigned a unique destination ID. Obtain the IP addresses of the TVP-224HR at remote sites and fill out the worksheet for remote destinations by designating each remote TVP-224HR a unique destination ID, then use the CLI command dadd dest_id h323 ip_addr [ip_port] to add it to the destination table.

  • Page 124: Atpm Hunt Group Table

    TVP-224HR User’s Guide ATPM Hunt Group Table When Several destinations may be grouped together to form a hunt group. incoming phone number matches the phone number of the hunt group, the TVP- 224HR attempts to terminate the call at each of the destinations in the hunt group one at a time until a call is successfully completed.

  • Page 125: Atpm Address Table

    TVP-224HR User’s Guide ATPM Address Table Each phone number to be recognized by the TVP-224HR must have its first digits match an entry in the address table. Fill out the address table worksheet and use the CLI command atpm aadd...

  • Page 126: Index

    Display Name...68 Download Mode...112 DSP ...4 DTMF...4, 61 DTMF Duration ...69 DTMF relay...63, 107 Endpoint Prefix ...70 TVP-224HR User’s Guide Factory Default Settings...113 Firmware Version ...67 First Digit Wait Time ...78 Foreign Exchange Office ... See FXO Foreign Exchange Station ...
  • Page 127 Terminal ID ...70 Terminal Type ...68 Termination Digit...78 TFTP ...4 TIM ...4, 61 Time To Live...70 TNV ...4 Total Time ...78 Troubleshooting ...105 UDP...4 User name...65 UTP ...4 TVP-224HR User’s Guide VAD...4, 12, 14 VoIP ...12, 14 WAN ...4 Worksheet ...115...

  • Page 128: Limited Warranty

    OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD. LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDWARE ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR TVP-224HR– 5 Years Warranty TVP-224HR User’s Guide...
  • Page 129 TVP-224HR User’s Guide INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE,...
  • Page 130 TVP-224HR User’s Guide...

Table of Contents