Table of Contents
Advertisement
2.10 Balance weight
1
Rule:
The balance weight (1) has to be positioned in a way that, with the
handwheel in position "210°", an Allen key (3) stuck in stands parallel
to the bed plate (2).
–
Loosen the screws on the balance weight (1).
–
Turn the balance weight (1) according to the rule.
–
Tighten the screws on the balance weight (1).
Caution: Danger of injury !
Turn the main switch off !
Check and set the balance weight only with the sewing machine
switched off.
3
2
17
EN
Advertisement
Table of Contents
