Dial; Tv Name; Softap - LG 49UV760H.AHK Installation Manual

34
INSTALLATION MENU

DIAL

- With this DIAL service, you can launch the target app at Smart Home Launcher bar without select the target app by remote
controller. The target app should be already selected at Installer Menu > General > Preloaded App.

TV Name

- When other media device(ex: smart phone, desktop, laptop) searching TV, this string was displayed.

SoftAP

- If you want to use SoftAp menu on MEDIA SHARE menu, you must select 'On' in this item.
A SoftAP is a function of TV which is used like Access Point.
- Regardless of the Instant On mode, the SoftAP setting stays unchanged after power off/on. (Depending on model)
Use Default
- If you want to use default password(this password was generated randomly), you must select 'Enable' in this item.
Security Key
- When guests want to use TV's SoftAP function, they need this password. If you want to change this default password, you
need to Change 'Use Default' value into 'Disable' .
Wi-Fi Signal Strength
- You can control wireless signal strength on SoftAP mode. This is controlled by 5 step. If you select 'Not Used' , wireless signal
strength will be set to Max value.
Wi-Fi Channel
- You can control wireless channel on SoftAP mode. This is controlled from 1 to 11 channel. If you select 'Auto' , wireless
channel of SoftAP will be set to random channel.