Media Share; Smartshare; Screen Share; Media Renderer - LG 55UT640SUA Installation Manual

Media Share

(Depending on model)

SmartShare

(Depending on model)
• Smart Share enables DLNA function. If this value is enabled, TV acts as Media Player and displays Media Server contents through Smart Share
app.

Screen Share

(Depending on model)
• Screen Share enables WiFi p2p functions. If this value is enabled, Screen Share app is displayed at launcher bar and TV can display the screen of
mobile phone or laptop.
• If you want Completely Exit Screen Share App, Click 'X' Button on right top side.

Media Renderer

(Depending on model)
• Media Renderer enables the TV to act as a Media Renderer device to receive contents from devices on the same network.

DIAL

(Depending on model)
• With this DIAL service, you can launch the target app at Smart Home Launcher bar without select the target app by remote controller. Before
this function enables, the target app should be selected at Installation Menu

TV Name

• When media devices(ex: smart phone, desktop, laptop) are searching TV, this string will be displayed.

SoftAP

(Depending on model)
• SoftAP is similar to Access Point. When you enable this function, TV acts as an Access Point.
• Regardless of the Instant On mode, the SoftAP setting stays unchanged after power off/on. (Depending on model)
Use Default
• If you want to use default password(this password was generated randomly), you must select 'Enable' in this item.
Portal Settings Preloaded App.
39