Table of Contents
Advertisement
DTV Programme Update
- It is a mode to set whether to update DTV programme automatically or not.
When DTV Programme Update is set to 'Auto' , the function to update TV's programme map according to dtv programme's
stream information.
DTV Programme Update is set to 'Manual' , the function to keep TV's programme map even though DTV programme's
information is changed.
On Timer Operation
- It is a mode to select 'On Timer Operation' working one time or repeatedly.
'Once': 'On Time' in the user menu operates only one time when the 'On Time' menu is set to 'ON' .
'Repeat' : 'On Time' operates repeatedly when the 'On Time' menu is set to 'ON' .
Radio Name Display
- Instead of "Audio Only", the name of a radio channel is displayed on the screen when a radio broadcast is playing.
- Set to On(Work) or Off(Do Not Work).
- If the setting is "On", the name of a radio channel is displayed for the radio channel.
- If the setting is "Off", the text "Audio Only" is displayed for the radio channel.
15Min Auto Off
- When '15Min Auto Off' is set to 'Enable' , TV will turn off if there is no signal in 15Min.
DVB-C (Depending on model)
- DVB-T/C programmes (channels) are searchable and selectable like following if DVB-C is "Enable".
DVB-C Bandwidth (Depending on model)
- If country is 'Philippines' , 'DVB-C Bandwidth' menu will be shown.
- Select the bandwidth of cable tuning.(6Mhz/8Mhz). The default is 6Mhz.
Auto Sensing
- If 'Auto Sensing' is set to 'On' , the input is automatically switched when the input signal that you set to "ON' is received.
- If 'Auto Sensing' is set to 'Disable' , the input is not switched when the input signal is received.
* SIMPLINK and Auto Sensing cannot work simultaneously. If SIMPLINK is set to On, Auto Sensing is automatically set to
Disable.
* If the signal is removed while Auto Sensing (automatic input switch) is enabled, the input returns to the previous setting.
If the several input are connected by enabling Auto Sensing and the automatic input returns to the previous setting.
If the several inputs are connected by enabling Auto Sensing and the automatic input switch is performed several times,
the input returns to the previous setting only for the last input and does not repeat the operation for the rest.
27
INSTALLATION MENU
Advertisement
Table of Contents
