Smeg FS9606AS User Manual page 39

Positioning and levelling
Heavy appliance
Risk of damage to the appliance
• Insert the front feet first and then the rear
ones.
• After making the gas and electrical
connections, screw on the four feet
supplied with the appliance.
The appliance must sit level on the floor to
ensure stability.
• Screw or unscrew the bottom part of the
foot until the appliance is stable and
level on the floor.
Installation
Assembling the backguard
The backguard provided is an
integral part of the product. It must
be fastened to the appliance prior
to installation.
The backguard must always be positioned
and secured correctly on the appliance.
1. Loosen the 4 screws (A) on the back of
the cooktop (2 for each side) using a
screwdriver.
2. Place the backguard on the worktop.
3. Align the slots of the backguard (B) with
the screws (A).
4. Tighten the 4 screws previously
loosened.
5. Use the 3 supplied screws to fix from
above the backguard to the cooktop.
41