How To Delete The Face Recognition Data - Toshiba Satellite T110 User Manual

2. Click the Register button in the Management screen. The Registration
screen is displayed.
■
■
3. Click the Next button to start the guide.
4. First, take a picture while moving your neck slightly to the left and right.
5. Now take a picture while moving your neck down and up.
■
6. Click the Next button to start image-capturing process. Adjust the
position of your face so that it fits within the face-shaped frame.
7. Once your face has been positioned properly, the recording will
commence. Start moving your neck very slightly to the left and right,
and then move your neck down and up.
8. Registration will end after you have repeatedly moved your neck left,
right, down and up. When the register succeeds, below message will be
displayed on the screen:
Click the Next button to perform the verification test.
9. Perform the verification test. Face the screen as you do when you
register.
■
10. If verification is successful, click the Next button and register an
account.
11. Register the account. Fill in the account registration fields.
■
When you have finished it, click OK button.
12. The Management screen is displayed. The registered account name
will be displayed. Clicking on it will cause the captured image of your
face to be displayed on the left.

How to Delete the Face Recognition Data

Delete image data, account information, and personal record data created
during registration. To delete the Face Recognition Data, follow the steps
as described below:
1. To launch this utility, click Start
Utilities
2. Select a user which is deleted in the Management screen.
User's Manual
If you wish to practice, click on the Next button in the Registration
screen.
If you do not wish to practice, click on the Skip button in the
Registration screen.
Click the Back button to practice the guide once more.
Registration successful. Now we'll do the
verification test. Click the Next button.
If verification fails, click the Back button and re-register. Please refer
to step 8 from step 6.
Fill in the all fields.
Face Recognition. The Management screen is displayed.
All Programs TOSHIBA
Operating Basics
4-5