Fujitsu T1323SC010IN Operating Manual page 78

Starting up and operation
Ê Follow the on-screen instructions (see also
onboard SATA controller" on page 80
and installing the operating system without the ServerView Installation
Manager" on page
– System already installed:
Ê Press the On/Off button (see
The power-on indicator lights green (see
The server is switched on, performs a system test and boots the
operating system.
Switching the server off
Power-on indicator (see
Ê Shut down the operating system properly.
The server is automatically switched off. The AC connected indicator lights
up green.
I
If the operating system does not switch the server off automatically,
press the On/Off button for at least four seconds and/or send a
corresponding control signal.
V
CAUTION!
There is a risk that data may be lost.
Other On/Off options
Besides the On/Off button, the server can be switched ON and OFF in the
following ways:
– Specified switch on time / switch off time
The server is switched ON or OFF at a time specified in the ServerView
Operations Manager.
– Ring indicator
The server is switched on by an internal or external modem.
– Wake On LAN (WOL) (Shared LAN only)
The server is switched on by a command via the LAN (Magic Packet)
78
83).
figure 13 on page
figure 14 on page
Operating Manual
section "Configuring the
or section "Configuring the server
64).
figure 14 on page
65) lights up green.
65).
TX1320 M3