Table of Contents
Advertisement
Starting up and operation
Ê Attach the drive cover to the recesses on the HDD cover (4).
Ê Push down the HDD cover in the direction of the arrow (5).
I
Please note the following when operating with tape drives:
If the system is programmed to eject the media automatically, the
accessible drives must not be obstructed.
The drive cover is replaced and the server locked in the reverse order.
Figure 11: Removing the drive cover from the HDD cover
Ê Carefully pull out on the green release lever (1) and lift off the drive cover (2).
62
Operating Manual
TX1320 M3
Advertisement
Table of Contents
