Table of Contents
Advertisement
Pos.
Label
6
iRMC-related status signals
Global error
ID indicator
indicator
blue flashing
off
blue flashing
orange flashing
TX1320 M3
Indicator
Status
green on
AC
connected
indicator
off
Description
A remote connection has been
established. Local VGA output has been
disabled during the remote session.
An emergency flash of the iRMC firmware
is in progress.
I
Operating Manual
Starting up and operation
Description
– The server is switched off and
connected to the mains
(standby mode).
– The server has been switched on
but Power Cycle Delay settings
delay it from turning on for a
specified time.
I
After connecting the server to
the mains, it will take about
60 seconds until the server
will enter standby mode and
can be switched on.
– The server is switched off and
not connected to the mains.
– The server is switched on and
operating normally.
For further information on the
emergency flash of the iRMC
firmware, refer to the "FUJITSU
Server PRIMERGY TX1320 M3
Upgrade and Maintenance
Manual".
67
Advertisement
Table of Contents
