Electrolux EW7W5247A2 User Manual page 8

8 www.electrolux.com
3. Open the door. Remove all the items from
the drum .
5. Remove the polystyrene protection from
the bottom. Put the appliance back into an
upright position.
7. Remove the three transit bolts and pull out
the plastic spacers.
We recommend that you
keep the packaging and
the transit bolts for any
transport of the appliance.
3.2 Information for installation
1. Positioning and levelling
1
2
4. Put the front polystyrene packaging
element on the floor under the appliance.
Carefully put down the appliance onto its rear
side.
6. Remove the power supply cable and the
drain hose from the hose holders.
It is possible to see water flowing from the
drain hose. This is because the washing
machine has been tested at the factory.
8. Put the plastic caps, that you find in the
user manual bag, in the holes.
Correctly adjusting the appliance so that
it is level prevents vibration, noise and
movement of the appliance when in
operation.
1. Install the appliance on a flat hard
floor. The appliance must be levelled and
stable. Make sure that the appliance
does not touch the wall or other units and