Table of Contents
Advertisement
18
www.electrolux.com
Programme
Default tempera‐
ture
Temperature
range
Spin/Drain
Rinse
Machine Clean
60 °C
Anti-Allergy
60 °C
Refer‐
Maxi‐
ence spin
mum
speed
load
Spin
speed
range
1400 rpm
7 kg
(1400 -
400 rpm)
1400 rpm
7 kg
(1400-
400 rpm)
1200 rpm
(1200 -
400 rpm)
-
1400 rpm
7 kg
(1400 -
400 rpm)
Programme description
(Type of load and soil level)
To spin the laundry and to drain the water in
the drum. All fabrics, except woollens
and delicate fabrics.
All fabrics, except woollens and very
delicate fabrics. Programme for rinsing
and spinning the laundry. The default spin
speed is the one used for cotton pro‐
grammes. Reduce the spin speed accord‐
ingly to the type of laundry. If necessary, set
the Extra Rinse option to add rinses. With a
low spin speed, the appliance performs deli‐
cate rinses and a short spin.
Maintenance cycle with hot water to clean
and freshen the drum and to remove resi‐
due that may cause odour. For the best re‐
sult use this cycle once a month. Before
running this cycle, remove all items from the
drum. In the washing phase compartment of
the detergent dispenser, put the flap of the
compartment in upward position. Pour a
cup of chlorine bleach or a washing ma‐
chine cleaner in the washing phase com‐
partment. DO NOT use both together.
After the drum cleaning, run a
further rinse cycle with empty
drum and no detergent to re‐
move any residue of bleach.
If you set this programme with the Dry, the
appliance performs the anti-fluff action. Re‐
fer to chapter 'Fluff in the fabrics'.
White cotton items. This programme re‐
moves micro-organisms thanks to a wash‐
ing phase with the temperature maintained
above 60°C for several minutes. This helps
remove germs, bacteria, micro-organism
and particles. An additional rinsing phase
ensures a proper removal of detergent resi‐
dues and pollens/allergenic items. In this
way the wash is more effective.
Advertisement
Table of Contents
