Table of Contents
Advertisement
11.1 NON-STOP programme -
Wash and dry
Not all programmes are
compatible with drying
function. The OneGo 1h 1kg
programme is already a
complete wash&dry
programme.
You can wash and dry your laundry
setting a «non stop-programme».
Proceed as follows:
1. Press the On/Off button for some
seconds to activate the appliance.
2. Load the laundry one item at a time.
3. Put the detergent and the additives in
the appropriate compartment.
4. Turn the programme dial to the
washing programme. The appliance
defaults to the washing only mode
and the indicator of the Wash button
is on. The display shows the default
temperature and spin. If necessary,
change them according to your
laundry.
5. Set the desired options, if there are
available.
6. Tap on the Mode button once to
activate also the drying function. Both
indicators of the Wash and Dry
buttons are on. The indicator
appears on the display.
11.2 Washing and Drying -
Automatic levels
1. Tap on the Auto Dry button
repeatedly until the display shows the
required dryness level. The indicators
in the display illuminate accordingly:
a.
Iron dry: for cotton items;
b.
Cupboard dry: for cotton and
synthetic items;
c.
Extra dry: for cotton items.
The time value on the display is the
duration of both cycles washing and
drying, calculated on a default load
size.
To have a good drying by
using less energy and in a
shorter time, the appliance
does not let you set a too
low spin speed for the items
to be washed and dried.
2. Touch button Start/Pause
the programme. The SensiCare
estimation starts.
In the display the door locked
indicator comes on.
The display also shows the remaining
programme time.
11.3 Washing and Timed
Drying
1. Tap on the Time Dry button
repeatedly to set the desired time
value (see the "Timed drying" table
the "Programmes" chapter). The
drying level indicator
the indicator
Each time you tap on this button the time
value increases by 5 minutes. The
display shows the set new time value.
2. Touch the Start/Pause
start the programme. The SensiCare
estimation starts.
In the display the door locked
indicator comes on.
The display also shows the remaining
programme time.
11.4 At the end of the drying
programme
• The appliance stops automatically.
• The acoustic signals operate (if they
are active).
• In the display
• The indicator of the Start/Pause
button goes off. The door locked
indicator goes off and the door
unlocks.
• Press the On/Off button for some
seconds to deactivate the appliance.
ENGLISH
to start
goes off and
comes on.
button to
comes on.
29
Advertisement
Table of Contents
