Page 1
PUBLIC ADDRESS SYSTEM T-30C T-60C MIXER AMPLIFIER T-60C MIXER AMPLIFIER OUTPUT LEVEL POWER PROTECT PEAK BASS TREBLE MIC 1 MIC 2 LINE 1 LINE 2 MUTE MIC 1 Please follow the instructions in this manual to obtain the optimum results from this unit.
1. SAFETY PRECAUTIONS Be sure to read the instructions in this section carefully before use. Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included. We also recommend you keep this instruction manual handy for future reference. Safety Symbol and Message Conventions Safety symbols and messages described below are used in this manual to prevent bodily injury and property damage which could result from mishandling.
Page 4
SAFETY PRECAUTIONS When the Unit is in Use When Installing the Unit Do not place heavy objects on the unit as this may Never plug in nor remove the power supply plug cause it to fall or break which may result in with wet hands, as doing so may cause electric personal injury and/or property...
2. GENERAL DESCRIPTION The Mixer Amplifier series is equiped with priority function. They are designed to suit all PA system application in schools home offices and stores. 3. FEATURES 100V/70V line transformer-isolated speaker outputs, low impedance 4-16 ohms speaker outputs. Two line input.
4. NOMENCLATURE AND FUNCTIONS 4.1 FRONT PANEL(2U) LEVEL POWER PROTECT PEAK BASS TREBLE MIC 1 MIC 2 LINE 1 LINE 2 MUTE MIC1 1. POWER 6. MIC1 \ MIC2 Power indicator MIC volume control (MIC1/MIC2) 2. POWER SWITCH 7. LINE1 \ LINE2 On top of the opening Power Line volume control(LINE 1/LINE 2) Press the end, power shut down...
NOMENCLATURE AND FUNCTIONS 4.2 REAR PANEL(2U) OUTPUT COM 4-16 70V 100V MIC2 LINE2 LINE1 12.SPEAKER TERMINALS LINE1 LINE2 Connectors for 4-16 ohms or 70V and 100V Line Balanced inputs speaker 16.~220-240V 50/60Hz POWER INPUT 13.FAN 17.INSURANCE TUBE 14.MIC MIC 2 input 6.3 Microphone jack input...
6. MACHINE OPERATION OPERATION ATTENTION 1. When the peak indicator in panel (red) power on, it means that the signal output is in distortion. The rea- sons are that: if all the electronic tube power on, it means input signal is too big, please turn it down: if not all the ones power on, it means output overload, please check the wire input.
8. SPECIFICATIONS MIXER AMPLIFIER MIXER AMPLIFIER MODEL T-30C T-60C RATED POWER OUTPUT SPEAKER OUTPUTS 4~16 ,70V/100V Bass: 10dB at 100Hz TONE Treble: 10dB at 10KHz FREQUENCY RESPONSE 40Hz~18KHz(half power output) POWER REQUIREMENTS ~220-240V 50/60Hz POWER CONSUMPTION 484X333X66 DIMENSION(mm) 6.4Kg 8.4Kg...
9. DIMENSIONAL DIAGRAM UNIT:mm LEVEL POWER PROTECT PEAK BASS TREBLE MIC 1 MIC 2 LINE 1 LINE 2 MUTE MIC1 OUTPUT COM 4-16 70V 100V MIC2 LINE2 LINE1 UNIT:mm LEVEL POWER PROTECT PEAK BASS TREBLE MIC 1 MIC 2 LINE 1 LINE 2 MUTE MIC1...
Need help?
Do you have a question about the T-30C and is the answer not in the manual?
Questions and answers