Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS
Description
Item No.
ITEM NO.: T-7B AND T-142RT OR T-45RT OR T-148RT OR T-48RT OR T-52T OR T-60RT
(PACKED IN SEPARATE BOX)
REVISED MAY 20, 2019
: TRANSITIONAL PEDESTAL FOR SOLID TOP
: T-7B AND T-142RT OR T-45RT OR T-148RT OR T-48RT OR
T-52T OR T-60RT
(PACKED IN SEPARATE BOX)
- 1 -
Printed in Vietnam
Advertisement
Related Manuals for Unfinished Furniture of Wilmington T-7B
Summary of Contents for Unfinished Furniture of Wilmington T-7B
- Page 1 : T-7B AND T-142RT OR T-45RT OR T-148RT OR T-48RT OR T-52T OR T-60RT (PACKED IN SEPARATE BOX) ITEM NO.: T-7B AND T-142RT OR T-45RT OR T-148RT OR T-48RT OR T-52T OR T-60RT Printed in Vietnam (PACKED IN SEPARATE BOX)
-
Page 2: Before Assembly
Description Sketch Description Sketch ITEM NO.: T-7B AND T-142RT OR T-45RT OR T-148RT OR T-48RT OR T-52T OR T-60RT Printed in Vietnam (PACKED IN SEPARATE BOX) REVISED MAY 20, 2019 - 2 -... -
Page 3: Hardware List
(M4 x 30mm x 110mm) Large Flat Washer (8.5 x 22mm) NOTE: HARDWARE IS PACKED IN CARTON T-7B. ITEM NO.: T-7B AND T-142RT OR T-45RT OR T-148RT OR T-48RT OR T-52T OR T-60RT Printed in Vietnam (PACKED IN SEPARATE BOX) REVISED MAY 20, 2019... - Page 4 Use the Allen key (6) to loosen the bolts and washers, and remove the plate underneath the table top as shown below. ITEM NO.: T-7B AND T-142RT OR T-45RT OR T-148RT OR T-48RT OR T-52T OR T-60RT Printed in Vietnam...
- Page 5 Carefully put the pedestal block on the bottom side of the table top, attach the top to plate with bolts and washers (from step 2) and tighten with the Allen key (6). ITEM NO.: T-7B AND T-142RT OR T-45RT OR T-148RT OR T-48RT OR T-52T OR T-60RT Printed in Vietnam...