Install The Router In A Rack; Wall-Mount The Router - NETGEAR BR200 Hardware Installation Manual

Install the router in a rack

To install model BR200 in a rack, you need the 19-inch rack-mount kit supplied with
model BR200.
To install model BR200 in a rack:
1. Attach the supplied mounting brackets to the side of the router.
2. Insert the small screws provided in the product package through each bracket and
into the bracket mounting holes in the router.
The package provides eight small screws, four for each side.
3. Tighten the screws with a No. 2 Phillips screwdriver to secure each bracket.
4. Align the mounting holes in the brackets with the holes in the rack, and insert two
pan-head screws with nylon washers through each bracket and into the rack.
5. Tighten the screws with a No. 2 Phillips screwdriver to secure mounting brackets to
the rack.

Wall-mount the router

The bottom panel of model BR200 provides four VESA mount holes that allow you to
mount the router to a wall. The router ships with wall-mount screws and anchors that
you can secure to a wall and attach the router to. We recommend that you use all four
screws for greater stability and correct positioning.Because of the hardware differences
between these models, the wall-mounting procedures also differ.
Installation
Insight Managed Business Router BR200
18 Hardware Installation Guide