Step 4: Install The Router; Install The Router On A Flat Surface - NETGEAR BR200 Hardware Installation Manual

Check the contents of the boxes to make sure that all items are present before installing
the router.
To check the package contents:
1. Place the container on a clean flat surface, and cut all straps securing the container.
2. Unpack the hardware from the boxes by carefully removing the hardware and placing
it on a secure and clean surface.
3. Remove all packing material.
4. Verify that the package contains the following items:
• BR200 router
• DC power adapter (varies by region)
• Wall-mounting screws and anchors
• Rack-mounting brackets
• Rack-mounting screws and washers
• Installation guide
• Rubber footpads for tabletop installation
5. If any item is missing or damaged, contact your local NETGEAR reseller for
replacement.

Step 4: Install the router

You can place the router on a flat surface, attach it to a wall, or install it in a standard
19-inch (48.26-centimeter) network equipment rack.
You can also use any off-the-shelf 100 mm VESA standard mount to secure the router
to a wall, a pole, or another surface.

Install the router on a flat surface

The router ships with four self-adhesive rubber footpads.
To install the router on a flat surface:
Stick one rubber footpad on each of the four concave spaces on the bottom of the
router.
The rubber footpads cushion the router against shock and vibrations. They also
provide ventilation space between stacked routers.
Installation
Insight Managed Business Router BR200
17 Hardware Installation Guide