Install The Router In A Rack; Wall-Mount The Router - NETGEAR BR500 Hardware Installation Manual

Install the router in a rack

To install the router in a rack, you need the 19-inch rack-mount kit supplied with the
router.
To install the router in a rack:
1. Attach the supplied mounting brackets to the side of the router.
2. Insert the small screws provided in the product package through each bracket and
into the bracket mounting holes in the router.
The package provides eight small screws, four for each side.
3. Tighten the screws with a No. 2 Phillips screwdriver to secure each bracket.
4. Align the mounting holes in the brackets with the holes in the rack, and insert two
pan-head screws with nylon washers through each bracket and into the rack.
5. Tighten the screws with a No. 2 Phillips screwdriver to secure mounting brackets to
the rack.

Wall-mount the router

The bottom panel of the router provides four VESA mount holes that allow you to mount
the router to a wall. The router ships with wall-mount screws and anchors that you can
secure to a wall and attach the router to. We recommend that you use all four screws
for greater stability and correct positioning.
Installation
Insight Instant VPN Router BR500
22 Hardware Installation Guide