Summary of Contents for Campania International Antique Quan Yin Buddha FT-330
Page 1
FT-330 Antique Quan Yin Buddha Fountain Assembly Instructions Fountain Information: • Two people are recommended for the installation of this fountain! • This fountain holds approximately 25 gallons of water. • This fountain uses a extra-large fountain cover: FTNCOV-XLG • Compatible with Refill Device and LED Kits •...
Page 2
FT-330 Antique Quan Yin Buddha Fountain Assembly Instructions Two people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
Page 3
FT-330 Antique Quan Yin Buddha Fountain Assembly Instructions Step 10 - Place the Antique Quan Yin Buddha (OR-165) on the statue base (FT-330A). OR-165 (182 lbs) 19.5"L x 15.5"W x 30.75"H Step 11 - Place the pump cover (FT-330D) over the pump and along the back wall of the basin (FT-329D).
Page 4
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.