Summary of Contents for Campania International Concept Birdbath FT-336
Page 1
FT-336 Concept Birdbath Fountain Assembly Instructions Fountain Information: • This fountain holds approximately 3-5 gallons of water. • This fountain uses a small fountain cover: FTNCOV-SM • No refill device or other submersible lights are suggested for this fountain. Pump Information: PK120 - 120 GPH low volt Pump with separate light and transformer (10 ft.
Page 2
FT-336 Concept Birdbath Fountain Assembly Instructions Fountain Set-Up: Assembly & Installation - A fountain can be diffi cult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin. Step 1 - Seek Professional Help: Check if professional installation is recommended for your fountain.
Page 3
FT-336 Concept Birdbath Fountain Assembly Instructions Step 8 - Using the PermaGum provided, wrap around each cord, then place it into the stopper with extra PermaGum fi lling the slit and cutting away any excess. Power Cord Step 9 - FIRMLY press the stopper into the hole evenly. 9a - Note: Using the handle of a screwdriver or hammer works best to press the stopper in place.
Page 4
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.