Summary of Contents for Campania International FT-333
Page 1
FT-333 MC-3 Fountain Assembly Instructions Fountain Information: • Two people are recommended for the installation of this fountain • This fountain holds approximately 20 gallons of water. • This fountain uses a large fountain cover: FTNCOV-LG • Compatible with Refill #10 Device and LED Kits •...
Page 2
8.5"L x 6"W x 6"H Step 8 - Fill the fountain with water. NOTE - The copper or steel face plates will be installed and sealed in place before shipping. FT-333CPP Copper Plate (for FT-333/CP) FT-333CSP Corten Steel Plate (for FT-333/CS)
Page 3
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - Ensure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.