LG Therma V HM091MRS Installation Manual page 41

Step 2. Connect power cable to main power terminal
See below figure for detailed information. When connecting earth cable, the diameter of
cable should be refer to the below table. The earth cable is connected to the Control box
case where earth symbol is
Step 3. Use cable clamps (or cord clamps) to prevent unintended move of power cable.
Step 4. Reassemble the side panel to the unit by fastening screws.
UNIT POWER
UN60A(1Ø : 9, 12, 14, 16 kW)
Failure to do these instruction can result in fire, electric shock or death.
• Make sure the power cable do not touch to copper tube.
• Make sure to fix [cord clamp] firmly to sustain the connection of terminal.
• Make sure to connect unit power & heater power separately.
marked.
CODE
CLAMP
UNIT POWER
UN36A (5, 7, 9 kW)
CODE CLAMP
INSTALLATION
CODE CLAMP
UNIT POWER
UN60A (3Ø : 12, 14, 16 kW)
41