TRENDnet TEW827DRUV2 User Manual page 73

Ac2600 mu-mimo wifi router
Table of Contents

Advertisement

TRENDnet User's Guide
802.11b: CCK, DQPSK, DBPSK
802.11a/g: OFDM with BPSK, QPSK and 16/64-QAM
802.11n: BPSK, QPSK, 16-QAM, 64-QAM with OFDM
802.11ac: OFDM with BPSK, QPSK and 16/64/256-QAM
Media Access Protocol
CSMA/CA with ACK
Antenna Gain
2.4 GHz: 4 x 3 dBi (max.) detachable/external; 5 GHz: 4 x 5 dBi
Wireless Output Power (max output power without antenna gain)
802.11a: FCC: 26 dBm (max.) / ETSI: 22 dBm (max.) / IC: 26 dBm (max.)
802.11b: FCC: 27 dBm (max.) / ETSI: 15 dBm (max.) / IC: 27 dBm (max.)
802.11g: FCC: 25 dBm (max.) / ETSI: 16 dBm (max.) / IC: 25 dBm (max.)
802.11n (2.4 GHz): FCC: 25 dBm (max.) / ETSI: 16 dBm (max.) / IC: 25 dBm (max.)
802.11n (5 GHz): FCC: 25 dBm (max.) / ETSI: 23 dBm (max.) / IC: 25 dBm (max.)
802.11ac: FCC: 25 dBm (max.) / ETSI: 24 dBm (max.) / IC: 25 dBm (max.)
Receiving Sensitivity (per chain)
802.11a: -70 dBm (typical) @ 54 Mbps
802.11b: -83 dBm (typical) @ 11 Mbps
802.11g: -70 dBm (typical) @ 54 Mbps
802.11n (2.4 GHz): -59 dBm (typical) @ 800 Mbps
802.11n (5 GHz): -59 dBm (typical) @ 800 Mbps
802.11ac: -55 dBm (typical) @ 1733 Mbps
Wireless Channels
2.4 GHz: FCC: 1-11; ETSI: 1-13
5 GHz: FCC: 36, 40, 44, 48, 149, 153, 157, 161, 165; ETSI: 36, 40, 44, 48, (52, 56,
60, 64, 100, 104, 108, 112, 116, 132, 136, 140)**
Power
Input: 100 – 240 V AC, 50 - 60 Hz
Output: 12V DC, 1.5A external power adapter
Consumption: 17.4W (max.)
Operating Temperature
0 – 40 °C (32 – 104 °F)
Operating Humidity
Max. 95% non-condensing
© Copyright 2017 TRENDnet. All Rights Reserved.
Certifications
CE
FCC
IC
Dimensions
250 x 180 x 45 mm (9.8 x 7.1 x 1.8 in.)
Weight
612 g (21.6 oz.)
*Disclaimers*
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical
specifications. Actual data throughput and coverage will vary depending on
interference, network traffic, building materials and other conditions. For maximum
performance of up to 1.733 Gbps use with a 1.733 Gbps 802.11ac wireless adapter. For
maximum performance of up to 800 Mbps, use with an 800 Mbps 802.11n wireless
adapter. Multi-User MIMO (MU-MIMO) requires the use of multiple MU-MIMO enabled
wireless adapters.
** Due to regulatory requirements, the wireless channels specified cannot be statically
assigned, but will be available within the available wireless channels when set to auto.
TEW-827DRU
70

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tew-827dru

Table of Contents