Cover Plate Drawing - ABB HT570679 Operation Manual

Operation Manual / 4 Product description / A150-M.. - A155-M..
9 Taking out of operation at short notice
9.5

Cover plate drawing

The cover plate is not included in the ABB Turbo Systems scope of delivery and must be
manufactured by the operating company according to the following drawing.
Material: General structural steel, in compliance with DIN EN 10025-2.
Figure 59: Cover plate drawing
Product B1 B2
± 0.5
A150 138.9 135
A155 164.6 160
Table 50: Cover plate dimensions [mm]
© Copyright 2017 ABB. All rights reserved.
B3 B4 B5
± 0.2
240 21.4 2.0
286.5 25.5 2.0
HZTL4032_EN
B6 B7 ØD1
± 0.1 ± 0.2
320 71.4 413.6
385 84.6 492
Revision F
Page 106 / 120
ØD2 R1 M
33 ≤ 196 M12
39 ≤ 232 M16
January 2017