Installing The Turbocharger - ABB HT570679 Operation Manual

Operation Manual / 4 Product description / A150-M.. - A155-M..
2 Removing and Installing
2.3

Installing the turbocharger

2.3.1 Inserting gaskets
Inserting the gaskets
Gaskets that are forgotten, damaged or improperly inserted will lead to oil
leaks.
CAUTION
Always use new gaskets and insert them carefully into the slot.

The necessary sealing is performed by O-rings which are located in the slots of the bearing
casing. The O-rings are supplied with the turbocharger.
Figure 9: Inserting the gasket
42001 Bearing casing
42200 O-ring
42195 O-ring
© Copyright 2017 ABB. All rights reserved.
01 Oil supply
02 Oil drain
HZTL4032_EN
Page 15 / 120
Revision F January 2017