Warning Plates On The Turbocharger - ABB HT570679 Operation Manual

Operation Manual / 4 Product description / A150-M.. - A155-M..
1 Introduction
1.5

Warning plates on the turbocharger

Warning plates are affixed at the following locations:
Figure 3: Warning plate locations
If warning plates are not present in the designated locations or not readable, proceed as fol-
lows:
Order new warning plates from ABB Turbocharging Service Stations.

Remove any warning plates that have become unreadable.

Clean and degrease the areas designated for the warning plates.

Fit new warning plates and remove protective sheets.

Turbochargers supplied to the enginebuilder without insulation must be equipped later with
warning plates on the insulation. This is the responsibility of the enginebuilder.
© Copyright 2017 ABB. All rights reserved. HZTL4032_EN
Page 8 / 120
Revision F January 2017