Dismantling And Fitting; Introduction - ABB HT570679 Operation Manual

Operation Manual / 4 Product description / A150-M.. - A155-M..
8

Dismantling and fitting

8 Dismantling and fitting
8.1

Introduction

Cutting injuries when working on the turbocharger
Some parts on the turbocharger may have sharp edges. There is a risk of a
cutting injury.
WARNING
Wear safety gloves against mechanical risks when conducting assembly

and disassembly work.
Wear safety gloves to protect against mechanical hazards.
Danger of burns
Touching hot surfaces can cause severe burns.
Do not touch hot surfaces.

WARNING
Wear heat-resistant safety gloves.

Clearly designate hot parts and assemblies when leaving the workplace.

Wear safety gloves to protect against thermal hazards.
Further operations
This Operation Manual may be used to carry out only those operations that
are described in it. Further operations that are executed in an incorrect way
CAUTION
can lead to serious damage to the machine.
ABB Turbo Systems recommends having further operations carried out

only by trained personnel from an ABB Turbocharging Service Station.
Mark the casing position for assembly.

© Copyright 2017 ABB. All rights reserved. HZTL4032_EN
Page 67 / 120
Revision F January 2017