Table of Contents
Advertisement
Set the audio
Start rekordbox to display [Select Speaker] while this unit is connected.
Select one of the options to match your audio environment and then
click [OK].
Adding track files to [Collection]
[Collection] is a screen for displaying a list of the track files managed by
rekordbox.
Registering the track files on the computer as the music collection of
rekordbox and then analyzing them enables those tracks to be used with
rekordbox.
1 Click [Collection] in the tree view.
A list of the tracks registered in [Collection] is displayed.
2 Open Finder or Windows Explorer, then drag and
drop track files or folders including track files to the
track list.
The track files are added to [Collection], and the waveform information
analysis of the track files starts. Wait until the analysis of all the track
files is finished.
Loading tracks into a deck
The following describes the procedure for loading tracks into deck 1 (left
side) as an example.
Turn the rotary selector to select a track in [Collection]
and then press the [LOAD] button of deck 1 (left side).
The track is loaded into the deck.
24
En
Playing a music file
The following describes the procedure for outputting the sound of deck 1
(left side) as an example.
1 Set the positions of the controls, etc., as shown
below.
Names of controls, etc.
1 EQ (HI, LOW) control
2 FILTER control
3 Channel fader
4 MASTER LEVEL control
5 Crossfader
1
2
3
5
2 Press the [PLAY/PAUSEf] button to play the track.
3 Move the channel fader away from you.
4 Turn the [MASTER LEVEL] control to adjust the audio
level of the speakers.
Adjust the audio level output from the [MASTER] output terminals to an
appropriate level.
Sound is output from the speakers according to your audio environment.
To adjust the volume of the sound output from a computer, use the
volume adjustment function of the computer.
Position
Center
Center
Moved forward
Turned fully counterclockwise
Center
4
Advertisement
Table of Contents
