Pioneer DDJ-WeGO4-W Operating Instructions Manual page 15

Playing a music file
The following describes the procedure for outputting the sound of deck 1
(left side) as an example.
1 Set the positions of the controls, etc., as shown
below.
Names of controls, etc.
EQ (HI, LOW) controls
FILTER control
Channel fader
MASTER LEVEL control
Crossfader
2 Press the [PLAY/PAUSEf] button to play the track.
3 Move the channel fader away from you.
4 Turn the [MASTER LEVEL] control to adjust the audio
level of the speakers.
Adjust the audio level output from the [MASTER] output terminals to an
appropriate level.
Sound is output from the speakers.
Monitoring sound with headphones
1 Set the positions of the controls, etc., as shown
below.
Names of controls, etc.
[HEADPHONES LEVEL] control
Position
Center
Center
Moved forward
Turned fully counterclockwise
Center
Position
Turned fully counterclockwise
2 Press the [HEADPHONES SELECT 1] button.
3 Turn the [HEADPHONES LEVEL] control.
Adjust the sound level output from the headphones to an appropriate
level.
Inputting the sound of the microphone
The sound of the microphone connected to the [MIC] input terminal can
be mixed.
1 Connect the microphone to the [MIC] input terminal.
2 Turn the [MIC LEVEL] control to adjust the audio level
of the microphone.
Quitting the system
1 Quit djay 2 for iPhone / iPad or vjay for iPhone / iPad.
2 Press the [STANDBY/ON] button until the unit enters
standby.
15
En