Panasonic FV-36RLQL1 Operating And Installation Instructions page 19

Phase 3
(Fig. J)
- If the trellis (E) is not used,
- Remove the paper tape (Fig.
and slide the chimney-extension set (L+M) downwards (Fig.
- Fasten the extension (M) once again to the trellis (E) with the 4 - M4 metric screws (V6 Ø4×7) (Fig.
- Slide the chimney (L) downwards (Fig.
Fasten it to the Range Hood body with 2 self-threading screws (V7 Ø4.2×12.5) (Fig.
- Pass the motor connector (B) through the loop of the cable tie (Fig.
- Pull band of the cable tie to fix the cable (Fig.
- Reconnect the motor connector (B) to the matching connector fastened to the Range Hood body (Fig.
And then, reconnect the LED connectors and reassemble the front panel (Refer to Fig. A).
- Refer to Chap. "MAINTENANCE", reassemble the metal filters and the perimeter suction panel.
Metal filter protective film must be removed.
- Set up the electric connection to power the Range Hood only after having disconnected the main power supply switch and
complied with current regulations (Fig.
- Power the Range Hood complying with the regulations in force.
J
V6
4 – Ø4×7
V6
4 – Ø4×7
6
2 – Ø4.2×12.5
Note :
- The electrical system to which the Range Hood is to be connected must be in accordance with local standards and supplied
with earthed connection in c ompliance with safety regulations in the country of use.
It must also comply with local standards regarding radio antistatic properties.
- Before connecting the Range Hood to the electrical mains power supply, check that : the power supply plug and cable do
not come into contact with temperatures exceeding 158 °F (70 °C);
- Check that the relief valve and the electrical system are able to support the load of the appliance (see the technical
specifications displayed on the rated plate in the Range Hood).
to are unnecessary.
1
5
), unscrew the 4 - M4 metric screws (V6 Ø4×7) previously screwed onto the trellis (E) (Fig.
1
).
5
) and then cut the excess band (Fig.
8
).
11
11
E
2
E
4
V7
).
3
).
7
3
M
1
L
5
).
4
).
6
).
9
).
10
7
8
Cable tie
9
Cable tie
10
B
2 )
B
19