Panasonic FV-36RLQL1 Operating And Installation Instructions page 13

Phase 1
(Fig. A)
- Refer to Chap. "MAINTENANCE", remove the perimeter suction panel and the metal filters completely.
- Remove the front panel (A) (Fig.
- Disconnect the LED connectors (Fig.
And then, pull out the motor connector (B) from the loop of the cable tie (Fig.
A
1
x3
(Fig. B)
- Loosen the 4 screws securing the motor chamber (C) (Fig.
- Shift the motor chamber (C) sideways to position the 4 screws against the hole instead of the slot (Fig.
- Lift the motor chamber (C) upwards to remove it from the Range Hood body (Fig.
B
1
2
3
, ).
1 2
) and the motor connector (B) (Fig.
3
2
1
4
4 ).
).
5
2
3
A
LED
connector
).
).
4
C
4
B
5
Cable tie
B
x3
, ).
2 3
13