Child (Key) Lock; Cancelling The Programme - Beko DSN Series User Manual

time indicated at the beginning due to
this process. The total time can also
change while the programme is running
depending on the ambient temperature
where your machine is installed,
temperature of the supply water and
amount of the dishes.
Pay attention not to open the door
of the machine when it is running.
Stop the machine by pressing Start
/ Pause / Cancel key if you have to
open the door. Then, open the door of
the machine. There may be a rush of
steam when you open the door of your
machine; be careful. Close the door of
your machine and press Start/Pause/
Cancel key again. Programme will
resume running.
The machine will remain silent in
pause mode for some time in order to
remove the water in the machine and
on the dishes completely and to have
the water softener cleaned, and then it
will resume running in drying mode.

Child (Key) Lock

You may prevent other people from
interrupting and changing the programme
cycle and time delay while the machine is
running.
To activate the Child Lock:
1. Pres Child (Key) Lock keys
simultaneously and hold for 3 seconds.
2. "3", "2", "1" is displayed on Display
Information Line and key lock is
activated.
Child Lock prevents the selected
programme or functions from being
changed and disables the Start / Pause
/ Cancel key.
Child Lock does not lock the door of
the machine.
If you turn your machine off by
using On/Off key at the end of the
programme, the Child Lock will be
deactivated automatically.
For energy saving, the product is
automatically turned off following the
completion of the programme or if the
programme is not started.
To deactivate the Child Lock:
1. Pres Child (Key) Lock keys
simultaneously and hold for 3 seconds.
2. "3", "2", "1" is displayed on Display
Information Line and key lock is
cancelled.

Cancelling the programme

1. Press Start/Pause/Cancel key for 3
seconds to cancel the programme.
2. Release the key when the Start /
Pause indicator starts flashing. For
a couple of minutes the machine will
fulfill the necessary operations required
to cancel the programme.
There might be residues of detergent
or rinse aid left in the machine and / or
on the pieces being washed depending
on the step the programme you have
cancelled was in.
Salt indicator ( )
Please check the salt indicator on the
display to see whether there is adequate
amount of softening salt in the dishwasher
or not. You need to refill the salt reservoir
with salt whenever salt warning indicator
appears on the display of your machine.
Adjusting the water hardness level is
explained in Water Softening System
section.
33/EN