Led And Button Functions; Led Indicator; Regular Button Function; Power On Utilities - Brecknell LP250 User Manual

4. LED and Button Functions

This printer has one button and one three-color LED indicator. By indicating the LED with
different color and pressing the button, printer can feed labels, pause the printing job, select
and calibrate the media sensor, print printer self-test report, reset printer to defaults
(initialization). Please refer to the button operation below for different functions.

4.1 LED Indicator

LED Color
Green/ Solid
Green/ Flash
Amber
Red / Solid
Red / Flash

4.2 Regular Button Function

1. Feed labels
When the printer is ready, press the button to feed one label to the beginning of next label.
2. Pause the printing job
When the printer is printing, press the button to pause a printing job. When the printer is
paused, the LED will be green blinking. Press the button again to continue the printing job.

4.3 Power on Utilities

There are six power-on utilities to set up and test printer hardware. These utilities are
activated by pressing FEED button then turning on the printer power simultaneously and
release the button at different color of LED.
Please follow the steps below for different power-on utilities.
1. Turn off the power switch.
2. Hold on the button then turn on the power switch.
3. Release the button when LED indicates with different color for different functions.
Description
This illuminates that the power is on and the device is ready to
use.
This illuminates that the system is downloading data from PC to
memory or the printer is paused.
This illuminates that the system is clearing data from printer.
This illuminates printer head open, cutter error.
This illuminates a printing error, such as head open, paper
empty, paper jam or memory error etc.
27