Printer Function (Calibrate Sensor, Ethernet Setup, Rtc Setup ) - Brecknell LP250 User Manual

3.3.2 Printer Function (Calibrate sensor, Ethernet setup, RTC setup
1. Select the PC interface connected with bar code printer.
2. Click the "Function" button to setting.
3. The detail functions in the Printer Function Group are listed as below.
Note:
For more information about Diagnostic Tool, please refer to the diagnostic utility quick start guide in
the CD disk \ Utilities directory.
Function
Calibrate the sensor specified in the Printer Setup
Calibrate Sensor
group media sensor field
Setup the IP address, subnet mask, gateway for
Ethernet Setup
the on board Ethernet (Please refer to next
section)
RTC Time Synchronize printer Real Time Clock with PC
Print Test Page Print a test page
Reset Printer Reboot printer
Initialize the printer and restore the settings to
Factory Default
factory default.
Dump Text To activate the printer dump mode.
Ignore AUTO.BAS Ignore the downloaded AUTO.BAS program
Configuration Page Print printer configuration
19
)
Description