3.2.2 Loading External Media (For LP-250 model only)
1. Open the printer's top cover and separate the media holders to fit the media
width.
2 P
d
3. Feeds the media through the rear external label entrance chute. And place the paper,
printing side face up, through the media guides, media sensor and place the label leading
edge onto the platen roller.
Rear external
label entrance
4. Close the top cover gently.
5. Use "Diagnostic Tool" to set the media sensor type and calibrate the selected
(Start the "Diagnostic tool"
Sensor" button)
Note: Please calibrate the gap/black mark sensor when changing media.
th
di h ld
l
Select the "Printer Configuration" tab
k
it h t fi th
12
di h ld
Click the "Calibrate