Advertisement
Installation (cont.)
7. Hang the unit on the wall to complete the
installation. Make sure the unit is seated prop-
erly. Apply silicon sealant on left and right
sides of the shower panel. (NOTE: do not seal
the bottom of the panel, this will allow any
possible future leaks to drain out the panel)
8. Attache shower head. Apply some (NOTE:
PTFE tape on the thread to prevent leaking)
9. Connect hand shower hose to the main
panel body. Install the rubber washer.
Decor Star
9
PL-026-GS Rev. A2 082016
Advertisement
