Transferring Data From The Sd Card To A Computer - General WK2017SD User Manual

5. To change the storage location
of manually logged data, press
the M button once; this causes the
"P" to disappear from the left side
of the display and the value on its
line to begin flashing. Once the
flashing begins, you can use the
M and L buttons to change the
flashing value to any number
between 1 and 99. Once you have
chosen the storage location, press
the REC/ENTER button to save the
setting. This causes the value to
stop flashing and the "P" to return.
6. To end manual datalogging,
press the REC/ENTER button and
hold it for at least three seconds.
This action causes the "REC"
message to disappear from the
top line of the display.
TRANSFERRING DATA
FROM THE SD CARD
TO A COMPUTER
After automatic or manual
datalogging of measurements,
remove the SD card from the meter
and plug it into your computer either
directly (if it has an SD card slot) or
through an SD card reader.
Because the files containing time-
stamped data logs have the file
extension .xls, they open in
Microsoft's Excel application.
Figures 5, 6 and 7 show three kinds
of Excel presentations: a data-only
screen, a graphics-only screen,
and a mixed data/graphics screen.
Fig. 5. Typical Excel data-only screen
Fig. 6. Typical Excel graphics-only screen
Fig. 7. Typical Excel mixed
data/graphics screen