Related Manuals for General DTH04
Summary of Contents for General DTH04
- Page 1 Jumbo Display In/Out Temperature-Humidity Meter with Clock USER’S MANUAL DTH04 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com...
-
Page 2: Key Features
KEY FEATURES • Triple readout shows time, inside or outside temperature, and inside or outside relative humidity (RH) • Stores and recalls Min and Max temp and RH readings • Warm, Comfortable and Cool indications • °C/°F switch on back •... -
Page 3: Operating Instructions
SETUP INSTRUCTIONS Install Batteries: 1. Slide off cover of battery compartment on back of unit. 2. Install (2) included “AAA” batteries in compartment in correct position. 3. Replace battery compartment cover. OPERATING INSTRUCTIONS ON/OFF: 1. Press ON/OFF button once to power on the meter and press again to power it off. - Page 4 2. Press HR and MIN buttons until the display shows the current time. 3. Press 12/24 button to select time format. 4. Press TIME SET button to save setting and return to real time mode. If button is not pressed within 5 seconds, unit will not save new setting and will return to real time mode using previous setting.
-
Page 5: Specifications
3. When the set alarm time is reached, will flash and alarm will sound for 1 minute. Press any key to silence the alarm. 4. 10 minutes after the alarm sounds, SNZ will flash and the alarm will sound 5 times. Press any key to silence the alarm. - Page 6 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com DTH04 User’s Manual Specifications subject to change without notice ©2012 GENERAL TOOLS & INSTRUMENTS NOTICE - WE ARE NOT RESPONSIBLE FOR TYPOGRAPHICAL ERRORS. MAN#DTH04 11/6/12...
Need help?
Do you have a question about the DTH04 and is the answer not in the manual?
Questions and answers